Metal-based additive manufacturing is an emerging low-cost manufacturing method to
produce components with complex features. Inconel 625 (IN625) is a nickel-based …

In this study, a novel MoNbTiZr refractory high-entropy alloy (RHEA) coating was
synthesized on Ti6Al4V surfaces by laser cladding (LC) with different processing …

Laser cladding of Inconel 718 superalloy with 75Cr 3 C 2+ 25 (80Ni20Cr) powder was
performed with a 400 W pulsed Nd: YAG laser using Response Surface Methodology. Laser …

Laser cladding with wire presents clear advantages in economic efficiency and cleanliness
over the powder-based system. To find the best coating performance, the Inconel 625 …

Optimization of process parameters for direct laser metal deposition of WC (88 wt%) and Co
(12 wt%) mixed powder on SS304 substrate was carried out to obtain minimum dilution. The …

Energy and material saving in additive manufacturing (AM) has become the main concern in
recent times for sustainable manufacturing. In this study, a 2 kW fiber laser was used in the …

Abstract Improper selection of Laser Engineered Net Sha** (LENS) process parameters
for the fabrication of cobalt‑chromium‑molybdenum (CoCrMo) alloy may result in poor …

A large amount of heat is involved in the wire and arc additive manufacturing (WAAM)
process under high deposition rate conditions. Energy accumulation affects the properties of …

When laser cladding is used to repair parts, the interaction of parameters has a significant
influence on equipment performance. In order to explore the process parameters and quality …

Laser metal deposition (LMD) has shown its unique advantages in surface strengthening
coatings and parts repair, and has brought revolutionary changes to manufacturing industry …