Hydrocarbon recovery from a hydraulic-fractured unconventional reservoir can be enhanced
by replacing slickwater with non-Newtonian high-viscosity gel as a fracturing fluid. However …

In this work, we use the steady-state measurement technique to characterize two-phase
brine-mineral oil relative permeabilities and residual trap** in water-wet rough-walled …

We present a new unified model for the permeability, electrical conductivity and streaming
potential coupling coefficient in variably saturated fractured media. For those, we …

The final stage in the life of a hydrocarbon well is decommissioning, which aims to ensure
that the original integrity of the cap rock is restored and all penetrated sub-surface …

Deterioration of cement/casing adhesion in wellbore scenarios can result in unwanted and
potentially harmful leakage with the potential of serious repair costs. In this work, the authors …

Coal seam water injection is a critical measure for the prevention of coal-and-gas outbursts.
However, the gas–solid–liquid coupling effect in front of the working face before and after …

Research has demonstrated the significant influence of surface roughness on electrical
conductivity and streaming potential. This article presents a model for the flow potential in a …

An integrated technical study was conducted for a field development project in west
Hungary. This study offers a better solution for estimating petrophysical properties and …

Wired Drill Pipe (WDP), distributed measurements, and associated technologies have been
deployed on the Norwegian Continental Shelf for many years. Recently, operators have …

In plug and abandonment (P&A) wells, the interface between the steel casing and cement in
a typical wellbore may debond and establish leakage pathways called microannulus. This …