This study investigated the effects of different cutting conditions, including dry, flooded,
chilled air, and the minimum quantity lubrication (MQL), on cutting forces, burr width, tool …

Machining of nickel-based superalloys still poses several problems, especially slot milling,
because the high work hardening, high metal carbide content and poor thermal conductivity …

This study investigates the polycrystalline diamond (PCD) tool's wear mechanism and the
effect of tool wear on hole morphology in the micro-drilling of C f/SiC composites. A 2D …

Diamond-like carbon (DLC) can be considered one of the frontline coating materials for high-
speed cutting tools owing to both abrasion resistance and solid lubricant properties …

In the milling process of high-strength steel, the tool and the chip produce severe contact
and friction, resulting in severe tool failure. Tools need to be replaced in a timely manner to …

In mechanical micro-cutting, a Minimum Undeformed Chip Thickness (MUCT) is desired to
ensure chip formation by the round-edged tool. Although the MUCT controls several …

The article concerns the possibility of the automation and robotization of the process of
deburring jet engine components. The paper presents the construction of a laboratory stand …

The nickel-titanium alloy (NiTinol) exhibits shape memory and superelasticity behavior,
stemming from its remarkable ability to alter the atomic bonding types and mechanical …

The burr caused by micromilling has become one of the main defects in small precise
mechanical parts. Most light sources in machine vision system are currently selected from off …

Abstract 1 In the milling process, due to machining materials and process parameters, the
material at the edge of the part may break due to shear forces instead of cutting properly …