Shaped metal deposition method using gas tungsten arc welding is a novel manufacturing
technology that can be used for fabricating solid dense parts in layered manufacturing. This …

In this research, super duplex stainless steel filler metals were clad on high strength low
alloy steel substrates by the tungsten arc welding process using pulsed and constant …

In the present study, the predictive model is developed to observe the effect of radial rake
angle on the end milling cutting tool by considering the following machining parameters …

Solidification cracking is very common in the welding process of austenitic stainless steels
and can lead to premature failures. Yet, the main quantitative impact of S, P and Si on …

The effect of process parameters such as forming load, temperature and the number of
passes on AA6061-T6 alloy subjected to severe plastic deformation by twist extrusion …

Critical equipments of process and heavy engineering industries are prone to significant
wear due to intense service conditions. Uneven and uncontrolled wear causes significant …

The residual δ-ferrite that remains at room temperature once a stainless steel has been
welded, that is, after it has experienced the process of melting followed by solidification, will …

To improve the corrosion-resistant properties of carbon steel, usually cladding process is
used. It is a process of depositing a thick layer of corrosion-resistant material over carbon …

The ferrite content of austenitic stainless steel welds seriously affects to perform stainless
steel welds. Kee** the ferrite content at the lower limit can reduce the thermal crack …

Super-duplex stainless steels have an excellent combination of mechanical properties and
corrosion resistance at relatively low temperatures and can be used as a coating to improve …