Transition to low carbon societies requires advanced catalysis and reaction engineering to
pursue green routes for fuels and chemicals production as well as CO 2 conversion. This …

One of the most attractive routes for the production of hydrogen or syngas for use in fuel cell
applications is the reforming and partial oxidation of hydrocarbons. The use of hydrocarbons …

The dry reforming of methane (DRM) reaction is among the most popular catalytic reactions
for the production of syngas (H2/CO) with a H2: CO ratio favorable for the Fischer–Tropsch …

The emission of greenhouse gases (GHGs), eg CO 2 and CH 4 into the atmosphere leads to
an undesirable effect on climate change. One viable solution is to convert these two GHGs …

Abstract Ni–Co/Mg (Al) O alloy catalysts with different Co/Ni molar ratios have been
prepared from Ni-and Co-substituted Mg–Al hydrotalcite-like compounds (HTlcs) as …

Nickel-containing hydrotalcite-derived materials have been recently proposed as promising
materials for methane dry reforming (DRM). Based on a literature review and on the …

DMR is a promising technique to utilize the rising greenhouse gases and produce an
alternative energy source. The main hurdle in the commercialization of DMR is the catalyst …

Ni-containing hydrotalcite-derived catalysts were prepared using different Ni loadings (from
ca. 4 to 60 wt%) at the same MII/MIII ratio equal to 3. The influence of the Ni content on the …

Hydrotalcite-derived catalysts promoted with Zr species were prepared via co-precipitation
method, resulting in materials with various Zr loading. Physicochemical properties of …

The process parameters for dry reforming of methane (DRM) over Ni–W/Al 2 O 3–MgO
catalyst are optimized using response surface methodology (RSM). The Ni–W bimetallic …