The design and fabrication of three-dimensional multifunctional architectures from the
appropriate nanoscale building blocks, including the strategic use of void space and …

Since discovered in the late 19th century, 1, 2 increasing research interest has focused on
the electrically conductive nature of the aromatic polymer family such as polyaniline (PAN), 3 …

Redox-active organic materials have gained growing attention as electrodes of
rechargeable batteries. However, their key limitations are the low electronic conductivity and …

Aniline was oxidized with ammonium peroxydisulfate in solutions of strong acid (0.1 M
sulfuric acid), weak acid (0.4 M acetic acid), or alkali (0.2 M ammonium hydroxide). The …

This work is aimed at develo** an electrochemical sensor for the sensitive and selective
detection of trace levels of perfluorooctanesulfonate (PFOS) in water. Contamination of …

The chemical or electrochemical oxidation of phenylenediamines in acidic aqueous media
yields the corresponding oligomers or polymers. Their structures and properties are …

Per-and polyfluoroalkyl substances (PFAS) are emerging as harmful environmental
micropollutants. Generally, PFAS species are quantified by mass spectrometry, for which a …

Fuel cells are considered as the only viable solution for long-range electromobility, but very
rare and expensive platinum is currently required for catalyzing the bottleneck reaction …

Imperfections that disrupt the sp2 conjugation of graphene can alter its electrical, chemical,
and mechanical properties. Here we report on the examination of monolayer chemical vapor …

The anodic oxidation of o-phenylenediamine at a platinum electrode in aqueous buffers at
different pH (1− 7), where growth of very thin (few nanometers thickness) and self-sealing …