Abstract Selective Laser Melting (SLM) allows the fabrication of complex geometries with
high resolution and robust mechanical properties. However, the manner of manufacture …

This paper presents a detailed investigation of the microstructure evolution and crack
propagation in quenching and partitioning (Q&P) steel at different strain rates. The results …

The effects of Al on microstructure, stacking fault energy, tensile properties and fractured
surface in Fe–18Mn–0.6 C–(0–2) Al twinning-induced plasticity (TWIP) steels were …

The paper aims at providing an overview of the research activities performed in the two past
decades in the field of materials characterisation under dynamic loadings (ie from 10− 3 s− 1 …

Material embrittlement is often encountered in machining, heat treatment, hydrogen and low-
temperature conditions among which machining is strain-rate related. More strain-rate …

This study assessed the quasi-static and dynamic tensile properties of additive
manufactured 316L stainless steel through a series of direct tensile tests. The fabrication of …

This paper aims to investigate the tensile behavior of a novel high-strength and high-
toughness steel at different strain rates ranging from 0.1 s− 1 to 1000 s− 1. Uniaxial tensile …

Abstract High-entropy alloys (HEAs), a novel class of metal alloys, have been receiving
increasing attention from the scientific community. HEAs have the potential to be used in …

Dual phase (DP) steels have been widely used in the automotive industry to reduce vehicle
weight and improve car safety. In such applications welding and joining have to be involved …

The strain rate effect on the tensile behaviors of a high specific strength steel (HSSS) with
dual-phase microstructure has been investigated. The yield strength, the ultimate strength …