Thermochemical behaviour, solidification, thermal stability and oxidation of Al-Mg2Si composites: An experimental and thermodynamic study
Abstract Effects of Mg and Si (Mg 2 Si) concentration on the thermochemical behaviour,
solidification, thermal stability and oxidation of Al-Mg 2 Si composites have been …
solidification, thermal stability and oxidation of Al-Mg 2 Si composites have been …
Microstructure based numerical simulation of the micromechanics and fracture in hypereutectic Al–Mg2Si composites
In the present study, both experimental and numerical examinations were performed to
understand the hypereutectic Al–Mg 2 Si composite's microstructural morphology …
understand the hypereutectic Al–Mg 2 Si composite's microstructural morphology …
Hardness, wear and friction characteristics of nanostructured Cu-SiC nanocomposites fabricated by powder metallurgy route
In the present study, hardness and tribological properties of nanostructured copper
reinforced with SiC nanoparticles of various volume fractions (0, 2, 4, and 6 vol%) were …
reinforced with SiC nanoparticles of various volume fractions (0, 2, 4, and 6 vol%) were …
Evaluation of a Cast Al-Mg2Si Composite for Automobile Disk-Brake Rotor Application
This investigation involved the development and characterization (microstructure,
mechanical properties, and dry sliding wear characteristics) of Al-Mg2Si composites for …
mechanical properties, and dry sliding wear characteristics) of Al-Mg2Si composites for …
Effect of Bi addition on microstructure and mechanical properties of hypereutectic Al-17.6 Si alloy
Abstract Al-17.6 Si-XBi (X= 0.0, 0.5, 1.0, 1.5 and 2.0 wt%) alloys have been synthesized
using gravity casting technique to study the influence of Bi concentration on the …
using gravity casting technique to study the influence of Bi concentration on the …
Effect of Cu element on morphology of TiB2 particles in TiB2/Al− Cu composites
SUN **g, X Wang, C Yan, W Fei, H Wang - Transactions of Nonferrous …, 2020 - Elsevier
In order to explore the influence of Cu element on the morphology evolution of the in-situ TiB
2 particles, the 10 wt.% TiB 2 reinforced Al− 5wt.% Cu based composite was prepared by …
2 particles, the 10 wt.% TiB 2 reinforced Al− 5wt.% Cu based composite was prepared by …
Effect of Mn Addition on the Mechanical Properties of Al–12.6Si Alloy: Role of Al15(MnFe)3Si2 Intermetallic and Microstructure Modification
Abstract Effect of manganese (Mn) addition (0.0, 1.0, 2.0 and 3 wt%) on the microstructural
morphology, hardness, tensile properties and fracture behaviour of the gravity cast eutectic …
morphology, hardness, tensile properties and fracture behaviour of the gravity cast eutectic …
[HTML][HTML] Investigating the thermal stability of nanocrystalline aluminum-lithium alloy by combining different mechanisms: Reinforcing with graphene and alloying with …
Interest in nanocrystalline (nc) aluminum-lithium (Al-Li) alloys is motivated by the demand for
lightweight and high-performance materials for light-weighting applications and superior fuel …
lightweight and high-performance materials for light-weighting applications and superior fuel …
Structure-property correlation of eutectic Al-12.4 Si alloys with and without Zirconium (Zr) addition
ABSTRACT The effect of Zr (0.1, 0.3, 0.5 wt.%) addition on microstructural morphology,
hardness, mechanical properties and fracture behaviour of gravity cast Al-12.4 Si alloy has …
hardness, mechanical properties and fracture behaviour of gravity cast Al-12.4 Si alloy has …
Micromechanical response of Al–Mg2Si composites using approximated representative volume elements (RVEs) model
Deformation behaviour, micromechanical response, and failure initiation of Al–Mg 2 Si
composites have been investigated in terms of stress-strain flow behaviour and localization …
composites have been investigated in terms of stress-strain flow behaviour and localization …