The effects of Fe and Ti on the microstructure and hardness of the as cast and heat treated
Nb–24Ti–18Si–5Fe–5Sn (NV8) and Nb–45Ti–15Si–5Fe–5Sn (NV4) alloys were studied …

Abstract Titanium (Ti) alloys with Niobium (Nb) and Tin (Sn) were prepared in order to
conduct a systematic study on the bulk and surface properties of as-cast cp Ti, binary Ti …

Dam** and Young's modulus have been measured in single-phase Ti3Sn using resonant
and dynamic mechanical techniques. The compound demonstrates unusual non-linear …

Phase equilibria in the Ti–Dy–Al system in the Ti–TiAl–DyAl 2–Dy region at 850° C were
studied by the methods of X-ray diffraction, SEM and electron microprobe. The isothermal …

Ti-based alloys or composites reinforced with high fraction of intermetallic or ceramic phases
may be good candidate for aerospace components operating under vibration and extremely …

Phase equilibria during solidification in the Ti–TiAl–DyAl2–Dy region of the Ti–Dy–Al system
are studied by differential thermal analysis, X-ray diffraction, metallography, and electron …

Physico-chemical analysis techniques, including X-ray powder diffraction, scanning electron
microscopy, optical microscopy and differential thermal analysis were employed in …

Phase equilibria in the Ti–Dy–Sn system below 40 at.% Sn were studied using differential
thermal analysis, X-ray diffraction, metallography and electron microprobe. The partial …

Titanium materials with a new ternary phase, Ti_6Si_2B, can be manufactured by high-
energy ball milling and further sintering of titanium, silicon, and boron powders. In this paper …

Considering factors such as the ageing population, growing demand for mobility at later
stages in life, and co-morbidities such as obesity, the incidence of joint replacements will …