Mechanical properties of metal nanolaminates

IJ Beyerlein, Z Li, NA Mara - Annual Review of Materials …, 2022 - annualreviews.org
This article reviews recent basic research on two categories of metal-based nanolaminates:
those composed of metal/metal constituents and those composed of metal/ceramic …

Recent advances in modeling of interfaces and mechanical behavior of multilayer metallic/ceramic composites

M Damadam, S Shao, G Ayoub, HM Zbib - Journal of Materials Science, 2018 - Springer
Since the introduction of the term “nanolaminate” in the mid-1990s, considerable research
activities on metallic/ceramic nanolaminates (MCN) have been conducted. Incorporating …

Heterophase interface-mediated formation of nanotwins and 9R phase in aluminum: Underlying mechanisms and strengthening effect

JD Zuo, C He, M Cheng, K Wu, YQ Wang, JY Zhang… - Acta Materialia, 2019 - Elsevier
Abstract Nanostructured crystalline Al/amorphous AlN multilayer films with a wide layer
thickness (h) range from∼ 10 nm up to∼ 200 nm were prepared by using magnetron …

Chemical-bonding and lattice-deformation mechanisms unifying the stability and diffusion trends of hydrogen in TiN and AlN polymorphs

Q He, TY Sun, LF Huang - Acta Materialia, 2024 - Elsevier
The continuous development of hydrogen-permeation barriers (HPB) based on metal
nitrides highly desires a generic unification of the key thermodynamic and kinetic …

mechanical behavior of metal/ceramic interfaces in nanolayered composites—experiments and modeling

N Li, XY Liu - Journal of materials science, 2018 - Springer
Recent experimental and modeling studies in nanolayered metal/ceramic composites are
reviewed, with focus on the mechanical behaviors of metal/nitrides interfaces. The …

[HTML][HTML] Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers

Z Chen, D Holec, M Bartosik, PH Mayrhofer, Z Zhang - Acta materialia, 2019 - Elsevier
Metastable rock-salt (face centered cubic, c-) AlN can be grown in CrN/AlN multilayers when
the AlN layer is thin enough. Exceeding a certain critical thickness, the thermodynamically …

Nanotwinned Boron Suboxide (B6O): New Ground State of B6O

Q An, KM Reddy, H Dong, MW Chen, AR Oganov… - Nano …, 2016 - ACS Publications
Nanotwinned structures in superhard ceramics rhombohedral boron suboxide (R-B6O) have
been examined using a combination of transmission electron microscopy (TEM) and …

Improving the crack resistance and fracture toughness of Cu/Ru multilayer thin films via tailoring the individual layer thickness

Q Zhou, S Zhang, X Wei, F Wang, P Huang… - Journal of Alloys and …, 2018 - Elsevier
The microstructure evolutions of Cu/Ru multilayered films with equal individual layer
thickness h ranging from 1.5 nm to 200 nm were investigated. Based on systematic X-ray …

Pulsed laser deposition of aluminum nitride films: Correlation between mechanical, optical, and structural properties

L Kolaklieva, V Chitanov, A Szekeres, K Antonova… - Coatings, 2019 - mdpi.com
Aluminum nitride (AlN) films were synthesized onto Si (100) substrates by pulsed laser
deposition (PLD) in vacuum or nitrogen, at 0.1, 1, 5, or 10 Pa, and substrate temperatures …

[HTML][HTML] Impact of metal/ceramic interactions on interfacial shear strength: Study of Cr/TiN using a new modified embedded-atom potential

N Dhariwal, ASM Miraz, WJ Meng, BR Ramachandran… - Materials & Design, 2021 - Elsevier
The effect of misfit dislocation networks (MDNs) on the stability and shear strength of Cr/TiN
was investigated using a newly developed modified embedded atom model parameterized …