Grid-connected converters exposed to weak grid conditions and severe fault events are at
risk of losing synchronism with the external grid and neighboring converters. This …

It is evident that renewable energy sources (RES), will soon be considered as primary
energy source in electrical networks. However, the increased penetration of RES along with …

Ship microgrids have recently received increased attention, mainly due to the extensive use
of power electronically interfaced loads and sources. Characteristics of these microgrids are …

Inverters in microgrids (MGs) face significant challenges during their parallel operations,
such as accurate power sharing, deviations in system voltage magnitude and frequency …

The three-phase four-leg (3p4L) inverter can be utilized to interface electric vehicles (EVs)
with the distribution networks. Vehicle to grid (V2G) inverters are employed to charge EVs …

Transmission faults caused by recent wildfires in California have induced the disconnection
of utility-scale converters in photovoltaic (PV) power plants. Postmortem investigations …

Increasing penetration level of distributed generation (DG) units necessitates their
participation in supporting power system stability and providing ancillary services. This …

The ability of riding through the grid disturbances can increase the integration of microgrids
into the distribution system. Consequently, a grid‐connected microgrid should provide …

Unbalanced grid faults are very harmful to the network operation. Distributed static
synchronous compensator (D-STATCOM) can help to support the grid voltage by injecting …

With the growing penetration of grid-connected microgrids (MGs), utility grid (UG) faces the
challenge of highlevel fault current during fault ride-through (FRT) of MGs. To tackle this …