Metal waste form (MWF) alloys of D9 stainless steel with 5–20wt.% zirconium (Zr) were cast
and used for the present work. The microstructural analysis by scanning electron microscopy …

The deformation of metals and alloys increases the energy of the system through the storage
of dislocations. This stored-energy is the driving force for the processes of recovery and …

Na-beta alumina batteries (NBBs) are one of the most promising technologies for renewable
energy storage and grid applications. Commercial NBBs are typically constructed in tubular …

Semi-solid processing involves forming metallic alloys between the solidus and the liquidus.
The microstructure must consist of solid spheroids in the liquid matrix, rather than dendrites …

The non-isothermal kinetics of precipitation of an Al-12.6 mass% Mg alloy for different
heating rates were studied using thermal expansion techniques. The structural changes …

In order to evaluate the effects of sheet processing on the grain boundary character
distribution (GBCD) of INCONEL alloy 718 (IN 718), electron backscattered diffraction …

Strain localization is inevitable during the rolling process and this manifests itself most
clearly in ferrite by the formation of shear bands and deformation and transition bands …

In the preceding discussion we have not concerned ourselves with the morphology of the
solid/liquid (S/L) interface. For calculation purposes it has been considered to be reasonably …

The effects of H on the mixed-mode I/III critical J-integrals (J {sub TC}) and tearing moduli
(dJ/da) were examined for a martensitic stainless steel at ambient temperature. AH content …

It was reported that the major recrystallization texture of the continuous cast (CC) Al-Mn-Mg
alloy sheet was P orientation ({011}〈 566〉) mainly due to the concurrent precipitation effect …