Quo vadis: Alcr-based coatings in industrial applications

J Vetter, AO Eriksson, A Reiter, V Derflinger, W Kalss - Coatings, 2021 - mdpi.com
AlCr-based hard nitride coatings with different chemical compositions and architectures
have been successfully developed and applied over the last few decades. Coating …

Oxygen concentration–A governing parameter for microstructural tailoring of duplex AlCrSiON coatings for superior mechanical, tribological, and anti-corrosion …

F Ahmad, RV Babu, X Kai, MR Abdullah… - Journal of Alloys and …, 2024 - Elsevier
This study investigates the impact of increasing oxygen levels on structure, and mechanical
properties and tribological performance of duplex AlCrSiON coatings. AISI H13 steel and …

Development of (Cr, Al) ON coatings using middle frequency magnetron sputtering and investigations on tribological behavior against polymers

N Bagcivan, K Bobzin, T Brögelmann… - Surface and Coatings …, 2014 - Elsevier
Plastic processing is an enormous and expanding commercial sector. Injection molding and
extrusion are common techniques for worldwide efficient mass production of plastic …

Investigation on plastic deformation of arc-evaporated AlCrSiN and AlCrSiON nanocomposite films by indentation

Z Wu, J Huan, D Geng, R Ye, Q Wang - Surface and Coatings Technology, 2022 - Elsevier
Nanoindentation produced plastic deformation of arc-evaporated AlCrSiN and AlCrSiON
nanocomposite films deposited on cemented-carbide substrates was investigated. The …

Microstructural investigation of CoCrFeMnNi high entropy alloy oxynitride films prepared by sputtering using an air gas

DD Le, SK Hong, TS Ngo, J Lee, YC Park… - Metals and Materials …, 2018 - Springer
Microstructural properties of as-grown and annealed CoCrFeMnNi high entropy alloy (HEA)
oxynitride thin films were investigated. The CoCrFeMnNi HEA oxynitride thin film was grown …

Interfaces in arc evaporated Al-Cr-N/Al-Cr-O multilayers and their impact on hardness

R Raab, CM Koller, S Kolozsvári, J Ramm… - Surface and Coatings …, 2017 - Elsevier
The impact of interfaces on mechanical properties of arc evaporated~ 1.2–2-μm-thin
multilayers—composed of alternating Al x Cr 1-x N and (Al x Cr 1-x) 2 O 3 layers with either …

[HTML][HTML] Structural and tribo-mechanical properties of AlCrVYON thin films with varying O contents sputtered from either AlCrVY or AlCrY and V targets

W Tillmann, F Rümenapf, D Aubry, E Schneider… - Surface and Coatings …, 2025 - Elsevier
Incorporating Y and V into AlCrN enhances its oxidation resistance and tribological
properties at elevated temperatures. As this improvement stems from the oxide formation of …

Characterization of magnetron sputtered sub-stoichiometric CrAlSiNx and CrAlSiOyNx coatings

A Al-Rjoub, P Costa, L Rebouta, MF Cerqueira… - Surface and Coatings …, 2017 - Elsevier
The influence of varying nitrogen and oxygen partial pressures on microstructure,
mechanical and optical properties of magnetron sputtered CrAlSiN x and CrAlSiO y N x …

Thermal stability of arc evaporated Al-Cr-ON coatings

R Raab, CM Koller, S Kolozsvári, J Ramm… - Surface and Coatings …, 2018 - Elsevier
Abstract (Al x Cr 1− x) δ (O 1− y N y) ξ coatings were arc evaporated using Al 0.70 Cr 0.30
cathodes and different nitrogen-to-oxygen gas flow ratios and investigated with respect to …

Structure and electronic properties of AlCrOxN1− x thin films deposited by reactive magnetron sputtering

H Najafi, A Karimi, E Oveisi, M Morstein - Thin Solid Films, 2014 - Elsevier
In this study, the main attempt is devoted to investigating the microstructure and electronic
properties of AlCrO x N 1− x films in a wide range of oxygen concentrations from 0 to 1 …