As the lightest structural metallic materials, Mg-Li alloys have a bright development prospect
in the fields of aerospace, weapon equipment, electronic technology and transportation. In …

Lightweight high entropy alloys (HEAs) have great application potential in automobile and
many other fields. Herein, novel low-cost Al 35 Mg 30− x Zn 30 Cu 5 Si x (x= 5, 10, 15) …

The study describes large strain high-speed asynchronous rolling process to process AZ91
magnesium alloy sheets with an overall thickness reduction of 84% via two-pass rolling at …

Abstract Al–Mg–Si alloys are widely used in many fields due to their excellent
comprehensive performance, but medium strength. In order to study the hot deformation …

Ni–Al energetic structural materials (ESMs) has been widely applied in defense field,
because of its good mechanical and energy release properties. The effects of the …

Hot tensile test was performed at deformation conditions of 150–° C 300° C and 8.33× 10− 5
s− 1~ 1.67× 10− 3 s− 1, respectively, to systematically study the microstructure development …

Ultrasonic vibration was introduced into the casting of quasicrystal-reinforced magnesium
alloy ZW61. The microstructure, mechanical properties, and corrosion resistance were …

In our previous work, we designed a new as-cast Mg–Y–Zn–Al–Li alloy with a high elastic
modulus of 52.9 GPa. The alloy was further subjected to hot deformation under different …

By observing the microstructure evolution of Mg-Ga alloy during tensile deformation, it is
found that the prismatic< a> slip and the pyramidal< c+a> slip occur during the tensile …

In this work, a multi-pass asymmetric rolling of Mg-8Li-1Zn alloy with four different directional
routes were carried out with a diameter ratio of 1: 1.08 for the upper and lower rolls, and the …