[HTML][HTML] Morphological, optical, and electrical properties of RF-sputtered zinc telluride thin films for electronic and optoelectronic applications
Zinc telluride (ZnTe) thin films were deposited by radio-frequency magnetron sputtering (RF-
MS) onto optical glass coated by a silver–copper (Ag: Cu) thin film representing the back …
MS) onto optical glass coated by a silver–copper (Ag: Cu) thin film representing the back …
An investigation on structural and optical properties of nanocolumnar ZnTe thin films grown by glancing angle technique
Abstract In this paper, Zinc Telluride (ZnTe) thin films have been deposited on glass
substrate by glancing angle deposition (GLAD) technique at different flux angles. The …
substrate by glancing angle deposition (GLAD) technique at different flux angles. The …
Study of Optical and Electrical Properties of RF-Sputtered ZnSe/ZnTe Heterojunctions for Sensing Applications
Cadmium (Cd)-free photodiodes based on n-type Zinc Selenide/p-type Zinc Telluride (n-
ZnSe/p-ZnTe) heterojunctions were prepared by Radio Frequency-Magnetron Sputtering …
ZnSe/p-ZnTe) heterojunctions were prepared by Radio Frequency-Magnetron Sputtering …
Undoped p-type ZnTe thin film and thin film transistor channel performance
In this study, the p-type Zinc Telluride (ZnTe) thin films were deposited by RF magnetron
sputtering technique on the patterned-ITO substrates. The RF-sputtered p-type ZnTe thin …
sputtering technique on the patterned-ITO substrates. The RF-sputtered p-type ZnTe thin …
[HTML][HTML] Growth of nanostructured ZnTe thin films through annealing of the MSELD-prepared Stack of precursors for photonic applications
D Singh, N Padha, Z Hussain, Z Ahmed… - Chemical Physics …, 2025 - Elsevier
ZnTe thin films were developed by annealing a stack of precursors deposited using the
multisource sequentially evaporated layer deposition method. The deposition was carried …
multisource sequentially evaporated layer deposition method. The deposition was carried …
Influence of substrate temperature on the properties of ZnTe: Cu films prepared by a magnetron co-sputtering method
Abstract Copper-doped Zinc Tellurium (ZnTe: Cu) films were deposited on borosilicate glass
using magnetron co-sputtering technique. The influence of the substrate temperature on the …
using magnetron co-sputtering technique. The influence of the substrate temperature on the …
[HTML][HTML] Computational study on the structural, electronic, lattice vibration, and magnetism in Zn (1− x) FexSeyTe (1− y) quaternary materials
In this article, we studied the structural, electrical, lattice vibrational, and magnetic properties
of the quaternary compound Zn (1− x) Fe x Se y Te (1− y) using density functional theory. All …
of the quaternary compound Zn (1− x) Fe x Se y Te (1− y) using density functional theory. All …
Characterization of ZnTe thin films prepared by cathodic electrodeposition as a back contact buffer layer to CdS/CdTe solar cells
A low-cost solution-processable electrochemical technique was used to deposit the Zinc
telluride (ZnTe) thin films. The growth potential− 0.9 V was optimized by using cyclic …
telluride (ZnTe) thin films. The growth potential− 0.9 V was optimized by using cyclic …
Material and Si-based diode analyses of sputtered ZnTe thin films
Structural, optical, and electrical properties ZnTe thin films grown by magnetron sputtering
technique were studied by X-ray diffraction, atomic force microscopy, Raman spectroscopy …
technique were studied by X-ray diffraction, atomic force microscopy, Raman spectroscopy …
Synthesis of high-quality ZnTe: Cu films as a back contact layer for CdTe solar cells
P-type copper-doped zinc telluride (ZnTe: Cu) is a good candidate as a back contact of
cadmium telluride (CdTe) solar cell. The deposition rate, transmittance and resistivity of …
cadmium telluride (CdTe) solar cell. The deposition rate, transmittance and resistivity of …