Consideration was given to the issue of the integrated evaluation of the flammable
properties and factors of wooden products (Oriented Strand Boards, OSB and Wood Particle …

Consideration was given to the issue of flammability during the thermal decomposition of
synthetic materials used for the constructions to isolate the process equipment and building …

In this work, the influence of different experimental parameters (electrode gap, electrode
shape, pressure and gas component) on spark discharge characteristics is investigated. The …

It is generally considered that spark resistance can be determined by circuit resistance
subtracted from the total resistance of the discharge circuit and circuit resistance is equal to …

There is usually a significant voltage drop on the electrode during the brief delay before
spark discharge occurs when the storage capacitance is small (around or below 100 pF) …

Spark ignition by low-energetic electrical discharges in combustible fuel/air mixtures is a
significant safety risk in various industries. In the present paper, OH-LIF measurements and …

This work investigates the rotating gliding arc (RGA) induced ignition of ammonia-air
mixtures by the synchronized measurements of voltage (U), current (I), the snapshots of RGA …

A study of the influence of the discharge gap length and the initial gas pressure on the
energy deposition into the discharge channel was done. The study was conducted at the …

Sažetak This research paper delves into the studies of the fire extinguishers with the
combined supply of the foam-water extinguishing agents in an aerosol state used for the …

A study of the influence of the discharge gap length and the initial gas pressure on the
energy deposition into the discharge channel was done. The study was conducted at the …