[HTML][HTML] Experimental determination and modelling of fuel rate of injection: A review
The fuel injection rate knowledge is essential for the evolution of injection systems,
improving engine performance, and controlling emissions. Fuel injection rate modelling from …
improving engine performance, and controlling emissions. Fuel injection rate modelling from …
[HTML][HTML] A numerical study on the effect of cavitation erosion in a diesel injector
M Cristofaro, W Edelbauer, P Koukouvinis… - Applied Mathematical …, 2020 - Elsevier
The consequences of geometry alterations in a diesel injector caused by cavitation erosion
are investigated with numerical simulations. The differences in the results between the …
are investigated with numerical simulations. The differences in the results between the …
[HTML][HTML] High pressure/high temperature multiphase simulations of dodecane injection to nitrogen: Application on ECN Spray-A
The present work investigates the complex phenomena associated with pressure/high
temperature dodecane injection for the Engine Combustion Network (ECN) Spray-A case …
temperature dodecane injection for the Engine Combustion Network (ECN) Spray-A case …
Numerical simulation of working process and gas-liquid interaction mechanism of air assisted nozzle
J Zhao, L Fu, H Ding, B Bai, D Zhang, J Liu… - International Journal of …, 2023 - Elsevier
The air assisted nozzle can achieve good atomization of high viscosity fuel at low injection
pressure. However, there are still few studies on the gas-liquid flow inside the nozzle …
pressure. However, there are still few studies on the gas-liquid flow inside the nozzle …
Measurements of droplet size in shear-driven atomization using ultra-small angle x-ray scattering
Measurements of droplet size in optically-thick, non-evaporating, shear-driven sprays have
been made using ultra-small angle x-ray scattering (USAXS). The sprays are produced by …
been made using ultra-small angle x-ray scattering (USAXS). The sprays are produced by …
Highly resolved Eulerian simulations of fuel spray transients in single and multi-hole injectors: Nozzle flow and near-exit dynamics
In high pressure fuel injectors, needle opening and closing transients cause complex off-
design fluid dynamics behaviors that profoundly impact the spray and mixture formation …
design fluid dynamics behaviors that profoundly impact the spray and mixture formation …
Numerical simulation of cavitation and atomization using a fully compressible three-phase model
The aim of this paper is to present a fully compressible three-phase (liquid, vapor, and air)
model and its application to the simulation of in-nozzle cavitation effects on liquid …
model and its application to the simulation of in-nozzle cavitation effects on liquid …
Ohmic heating of blended citrus juice: Numerical modeling of process and bacterial inactivation kinetics
A comprehensive 3D, transient-free convection, and multiphase model was developed to
determine the performance of ohmic heating (150, 200 and 250 V; 120 s; 99.4° C) and …
determine the performance of ohmic heating (150, 200 and 250 V; 120 s; 99.4° C) and …
Numerical investigation on cavitating jet inside a poppet valve with special emphasis on cavitation-vortex interaction
C Yuan, J Song, L Zhu, M Liu - International Journal of Heat and Mass …, 2019 - Elsevier
A thorough understanding of the internal flow dynamics inside a poppet valve makes sense
for an improved control performance. Hence, a numerical simulation for the cavitating jet is …
for an improved control performance. Hence, a numerical simulation for the cavitating jet is …
Evaluation of shot-to-shot in-nozzle flow variations in a heavy-duty diesel injector using real nozzle geometry
Cyclic variability in internal combustion engines (ICEs) arises from multiple concurrent
sources, many of which remain to be fully understood and controlled. This variability can, in …
sources, many of which remain to be fully understood and controlled. This variability can, in …