Titanium is the ideal material for fabricating dental implants with favorable biocompatibility
and biomechanics. However, the chemical corrosions arising from interaction with the …

Nanocrystalline (NC) metallic materials have better mechanical properties, corrosion
behavior and biocompatibility compared with their coarse-grained (CG) counterparts …

Pushing the internal or external dimensions of metallic alloys down to the nanometer scale
gives rise to strong materials, though most often at the expense of a low ductility and a low …

The trade-off between strength and toughness has always been a key problem hindering the
application prospect of titanium alloys. In this study, Ti–6Al–4V titanium alloy was processed …

Enhancing the corrosion resistance of titanium alloys in hot nitric acid environments is
imperative for advancing spent fuel reprocessing. Here, we explored the impact of Al …

This work investigated the influence of cold rolling reduction and solution treatment on β
stability and mechanical properties of a metastable β-Ti alloy (Ti–5Mo–2Cr–Fe–3Zr). The …

Titanium oxide (TiO 2) precursor is often deposited on conductive fluorine doped tin oxide
(FTO) to convert into crystalline anatase phase after a thermal annealing at 400–550° C. A …

Aluminium alloy AA2219 is widely used in the fabrication of propellant tanks of cryogenic
stages of satellite launch vehicles. These propellant tanks are welded structures and a fine …

The relationship between acoustic parameters and the microstructure of a Cu30Zn brass
plate subjected to plastic deformation was evaluated. The plate, previously annealed at 550° …

In this paper, the microstructure and mechanical properties of Fe-36% Ni alloy after 90%
reduction of cryorolling (CR) and subsequent annealing were investigated. The X-Ray …