Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
Impact-abrasive wear of martensitic steels and complex iron-based hardfacing alloys
Highly loaded wear components in manifold applications such as sieves, crushers, etc.
suffer from combined impact and abrasive wear. To gain deeper understanding of different …
suffer from combined impact and abrasive wear. To gain deeper understanding of different …
Advanced chromium carbide-based hardfacings
Ceramic metal composite powders are widely used in thermal spray technologies; however,
application of such hardphases in cladding systems has not been strongly developed yet. In …
application of such hardphases in cladding systems has not been strongly developed yet. In …
Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions
Within this work, the effect of carbide degradation in a WC/W2C reinforced Ni-based
hardfacing was assessed under abrasive and combined impact/abrasive conditions. In view …
hardfacing was assessed under abrasive and combined impact/abrasive conditions. In view …
Wear characterization of multilayer laser cladded high speed steels
The wear behavior of three laser clad high speed steel (HSS) alloys and one conventional
spun cast HSS alloy was investigated by using a pin on disc tribometer at 25° C and 500° C …
spun cast HSS alloy was investigated by using a pin on disc tribometer at 25° C and 500° C …
High temperature abrasive wear of metallic materials
Abrasive wear at high temperatures (HT) is a serious issue that limits the lifetime of many
industrial components, eg in steel production, the cement or the chemical industry. Various …
industrial components, eg in steel production, the cement or the chemical industry. Various …
How the micro-mechanical stability of carbides in chromium-rich hardfacings influences the impact-abrasion resistance at elevated temperatures
Highly loaded wear components in applications such as crushers or sieves suffer from
combined impact and abrasive wear, in the worst case exaggerated by high operation …
combined impact and abrasive wear, in the worst case exaggerated by high operation …
Wear reducing effects and temperature dependence of tribolayer formation in harsh environment
Certain materials show a tribolayer formation especially at enhanced temperatures in
abrasive environment, building a wear protection layer with the abrasive on the surface …
abrasive environment, building a wear protection layer with the abrasive on the surface …
Erosive wear performance of heat treated multi-component cast iron containing Cr, V, Mn and Ni eroded by alumina spheres at elevated temperatures
Y Zhang, K Shimizu, X Yaer, K Kusumoto… - Wear, 2017 - Elsevier
Due to the urgent demand for the development of new materials with high performance and
relatively low cost, materials with varying vanadium (V) and chromium (Cr) content were …
relatively low cost, materials with varying vanadium (V) and chromium (Cr) content were …
High temperature wear of cermet particle reinforced NiCrBSi hardfacings
The aim of the current study was to investigate erosive and impact/abrasive wear behaviour
of TiC–NiMo and Cr 3 C 2–Ni reinforced NiCrBSi hardfacings at temperatures up to 700° C …
of TiC–NiMo and Cr 3 C 2–Ni reinforced NiCrBSi hardfacings at temperatures up to 700° C …
Tribological behaviour of plasma and HVOF-sprayed NiCrSiBFe coatings
Investigation of tribological behaviour of NiCrSiBFe coating on SS 316L sliding against AISI
52100 bearing steel, alumina (Al2O3), and silicon nitride (Si3N4) under dry conditions …
52100 bearing steel, alumina (Al2O3), and silicon nitride (Si3N4) under dry conditions …