The hot deformation behavior of Al-Mg-Si alloys was investigated by isothermal
compression tests in a temperature range from 400° C to 550° C and a strain rate range from …

The hot compression tests for spray deposited alloy 2195 were performed on Gleeble-1500
thermomechanical simulator at different conditions. The constitutive models and processing …

The present study aimed at characterizing the flow characteristics and workability of an as-
extruded magnesium alloy ZK61 by isothermal compression tests performed at temperatures …

For characterizing the hot workability of high-strength AA7050 aluminum alloy, constitutive
equations and processing maps were established. The activation energy values under …

Hot compression tests in the temperature range of 493-653 K and strain rates of 0.01-10.00
s− 1 were used to evaluate the hot deformation behavior of 60Mg-30Pb-9.2 Al-0.8 B alloy. In …

In this study, the tensile flow behaviour of AA5182-O sheet was experimentally obtained in
different material directions (RD, DD, and TD) at strain rates ranging from 0.001 to 1000 s− 1 …

The rare-earth (RE) contained ultrafine grained (UFG) Magnesium (Mg) alloys are excellent
materials for aerospace and automobile industries due to their ultra-light weight, high …

Hot compressive deformation behaviors of the aged nickel-based superalloy are studied
under the deformation temperature range of 920–1040° C and strain rate range of 0.001–1 …

The effect of W-temper heat treatment, consisting of solution heat treatment (SHT) and rapid
cooling, on the mechanical properties and fracture of high strength aluminum alloy 7075 …

The study presents an investigation of hot deformation behaviour of 4340 steel and
optimization of its processing parameters. The isothermal compression tests were performed …