Open-cell metal foams with an average cell diameter of 2.3 mm were manufactured from
6101-T6 aluminum alloy and were compressed and fashioned into compact heat …

In the present work, the performance of proton exchange membrane fuel cells is studied for
three cases; A fuel cell with two parallel flow channels (model A), locally baffle restricted flow …

Foam structures are a class of modern microporous media that possesses high thermal
conductivity, large accessible specific surface area, and high porosities. Nowadays …

In the present paper we study the immiscible two-phase flow in porous media using the
lattice Boltzmann model proposed by He et al.[X. He, R. Zhang, S. Chen, GD Doolen, Phys …

An experimental apparatus was constructed to measure the structural parameters of organic
porous media, i., e. mechanical strength, air‐filled porosity, air permeability, and the Ergun …

Various models are available for simulating turbulent flows in porous media. Models based
on the eddy viscosity assumption are often adopted to close the Reynolds stress term. In …

High‐precision straddle packer tests were conducted in boreholes in a fractured dolostone
aquifer using constant rate injection (Q) step tests to identify the conditions of change from …

Hydraulic aperture (eh) which is independent of inertial effect has been widely used as an
important parameter to study the geometric properties of single fractures in previous studies …

The internal architecture of metal foam is significantly different from that of traditional porous
media. This provides a set of challenges for understanding the fluid flow in this relatively …

Sediment sludge during coagulation and sedimentation in drinking water treatment is called
“water treatment residuals (WTR)”. Polyaluminum chloride (PAC) is mainly used as a …