Characteristics and manufacturability of duplex stainless steel: a review
Duplex stainless steels (DSS) have been growing continuously as they are cost effective
alternative to austenitic stainless steel with better mechanical and corrosion resistance …
alternative to austenitic stainless steel with better mechanical and corrosion resistance …
Dry cutting effect in turning of a duplex stainless steel as a key factor in clean production
The machining of duplex stainless steel usually involves the application of cutting fluids,
which consequently leads to negative ecologic, environmental and health impacts …
which consequently leads to negative ecologic, environmental and health impacts …
Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel
A detailed understanding of the hot deformation and work hardening behavior of LDX 2101
dual phase steel has been obtained through a wide range of hot compression tests with …
dual phase steel has been obtained through a wide range of hot compression tests with …
Hot working behavior of 2205 austenite–ferrite duplex stainless steel characterized by constitutive equations and processing maps
The hot deformation characteristics of the 2205 duplex stainless steel were analyzed using
constitutive equations and processing maps. The hot compression tests were performed at …
constitutive equations and processing maps. The hot compression tests were performed at …
Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases
High temperature behavior of 2205 duplex stainless steel was studied by considering
behavior of each constituent phase. The specimens were subjected to hot compression tests …
behavior of each constituent phase. The specimens were subjected to hot compression tests …
Machinability study of first generation duplex (2205), second generation duplex (2507) and austenite stainless steel during drilling process
Machinability tests were conducted on duplex alloys SAF 2205 and SAF 2507, while
employing austenite stainless steel 316L as a benchmark during drilling. Tool wear, cutting …
employing austenite stainless steel 316L as a benchmark during drilling. Tool wear, cutting …
Novel mechanical characterization of austenite and ferrite phases within duplex stainless steel
The microstructure and micromechanical properties of the constitutive phases of a particular
duplex stainless steel in various processing conditions have been characterized. Hardness …
duplex stainless steel in various processing conditions have been characterized. Hardness …
Microhardness and surface integrity in turning process of duplex stainless steel (DSS) for different cutting conditions
The objective of the investigation was to identify microhardness of surface integrity (SI) after
turning with wedges of coated sintered carbide. SI is important in determining corrosion …
turning with wedges of coated sintered carbide. SI is important in determining corrosion …
Modified constitutive analysis and activation energy evolution of a low-density steel considering the effects of deformation parameters
In the present study, typical hyperbolic sine equation was found inappropriate to model the
flow behavior of a Fe-18Mn-8Al-0.8 C low-density steel in warm to hot deformation regime …
flow behavior of a Fe-18Mn-8Al-0.8 C low-density steel in warm to hot deformation regime …
Experimental analysis by measurement of surface roughness variations in turning process of duplex stainless steel
The objective of the investigation was to identify surface roughness after turning with
wedges of coated sintered carbide. The investigation included predicting the average …
wedges of coated sintered carbide. The investigation included predicting the average …