Aluminium and magnesium matrix composites are attractive lightweight materials with
strength surpassing that of the corresponding matrix metals. Recent years have seen …

The current status of field assisted sintering technology (FAST) of structural metals from
powder is critically reviewed. Recently, there have been significant increases in the uptake …

Based on orthogonal experimental design (OED), the effects of the sintering pressure,
sintering temperature and holding time on the mechanical properties of 50 vol% silicon …

AlON ceramics were prepared by spark plasma sintering (SPS) with raw materials (60 mol%
Al 2 O 3 and 40 mol% AlN) and sintering aids (0.16 wt% Y 2 O 3+ 0.3 wt% MgO+ 0.06 wt …

Beryllium particle reinforced aluminum matrix (Be/Al) composite with exceptionally high
strength was fabricated from Be debris by self-exhaust pressure infiltration and hot extrusion …

Laser powder-bed-fusion (L-PBF) was utilized to fabricate Si 3 N 4 reinforced AlSi10Mg
composites in this study. The Response Surface Methodology (RSM) was employed to …

The poor mechanical and tribological properties limit the higher requirements of aluminum
alloys in engineering and industrial applications, which leads to the rapid development of …

To investigate microstructure evolution and improve mechanical properties of quasi-
continuous network structured (Ti 3 AlC 2-Al 3 Ti)/2024Al composites, Hot rolling with entire …

Metal matrix composite reinforced by ceramic particles generally demonstrated a significant
improvement in strength, while its ductility is suppressed sharply due to the incompatible …

The present investigation is aimed at identifying the influence of silicon nitride (Si3N4)
reinforcement on the mechanical behavior of Al-Si3N4 composites. Five different …