High-entropy intermetallic compounds (HEICs) and high-entropy ceramics (HECs) are both
novel materials obtained by introducing chemical disorder through the mixing of multiple …

High-performance microwave absorption coatings are critically required in the stealth
defense system of military platforms. Regrettably, just optimizing the property but neglecting …

Polymer‐derived ceramics (PDCs) are being actively explored in various fields today
because of their unique physiochemical properties. Very recent advances in the use of …

Ceramic aerogels prepared by the route of polymer-derived ceramics (PDCs) have been of
significant attention in high-temperature insulation. However, the application of ceramic …

Silicon carbide (SiC) fiber is a high-performance ceramic fiber mainly prepared by the
polymer-derived ceramics (PDC) method. However, balancing the precursor's ceramic yield …

A high-pressure assisted precursor impregnation pyrolysis method (PIP) was used to
prepare 3D PyC-C f/SiHfBOC composites. Its anti-ablation properties were tested in an …

Ceramic aerogel with high porosity and low thermal conduction was widely used in the field
of thermal insulation. However, shrinkage and structural damage were produced by the …

Structural damage and shrinkage cracking were exhibited during the pyrolysis of ceramic
aerogels prepared by the polymer-derived ceramics (PDCs) route. Herein, the shrinkage of …

Amorphous Si3N4 and SiBN monoliths without sintering additives are successfully prepared
by high‐pressure–low‐temperature (HPLT) sintering using the single‐source‐precursor …

Cubic silicon nitride (γ-Si 3 N 4) is superhard and is the hardest material after diamond and
cubic boron nitride (cBN), but has higher thermal stability than diamond and cBN, making it a …