Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
Corrosion protection with hard coatings on steel: Past approaches and current research efforts
M Fenker, M Balzer, H Kappl - Surface and Coatings Technology, 2014 - Elsevier
This work gives a review on published results on the corrosion behavior of hard coatings
deposited on steel substrates by mainly physical vapor deposition (PVD) or in some cases …
deposited on steel substrates by mainly physical vapor deposition (PVD) or in some cases …
A review on physical vapor deposition-based metallic coatings on steel as an alternative to conventional galvanized coatings
An effective way to protect the steel surface from degradation is to develop a coating on top
of the steel substrate. A wide variety of coating deposition processes are available to …
of the steel substrate. A wide variety of coating deposition processes are available to …
Effect of cutting parameters on tool wear, cutting force and surface roughness in machining of MDN431 alloy using Al and Fe coated tools
Thin solid films are used in cutting tools in order to improve its performance, reduce tool
wear and improve tool life. Cathodic arc evaporation is the state of art PVD technique widely …
wear and improve tool life. Cathodic arc evaporation is the state of art PVD technique widely …
[HTML][HTML] A review on tribocorrosion behavior of aluminum alloys: From fundamental mechanisms to alloy design strategies
Tribocorrosion, a research field that has been evolving for decades, has gained renewed
attention in recent years, driven by increased demand for wear-and corrosion-resistant …
attention in recent years, driven by increased demand for wear-and corrosion-resistant …
A prolonged exposure of Ti-Si-BC nanocomposite coating in 3.5 wt% NaCl solution: Electrochemical and morphological analysis
The electrochemical behaviour of magnetron sputtered Ti-Si-BC nanocomposite coating on
SS 304 substrate has been examined using potentiodynamic polarization and …
SS 304 substrate has been examined using potentiodynamic polarization and …
Robust superhydrophobic coating with superior corrosion resistance
T **ang, D Chen, Z Lv, Z Yang, L Yang, C Li - Journal of alloys and …, 2019 - Elsevier
Superhydrophobic surface has been applied for corrosion resistance and yield many
innovations. However, most of the superhydrophobic surfaces are fragile and would lose its …
innovations. However, most of the superhydrophobic surfaces are fragile and would lose its …
Development and tribo-mechanical properties of functional ternary nitride coatings: Applications-based comprehensive review
Friction and wear are very crucial aspects of the performance, service life, and the
operational costs for a mechanical component or equipment. To reduce the friction and wear …
operational costs for a mechanical component or equipment. To reduce the friction and wear …
Corrosion behaviour and hardness of in situ consolidated nanostructured Al and Al–Cr alloys produced via high-energy ball milling
This paper presents a hypothesis and its experimental validation that simultaneous
improvement in the hardness and corrosion resistance of aluminium can be achieved by the …
improvement in the hardness and corrosion resistance of aluminium can be achieved by the …
Corrosion behavior of Ti-Cr-N coatings on tool steel substrates prepared using DC magnetron sputtering at low growth temperatures
K Taweesup, P Visuttipitukul, N Yongvanich… - Surface and Coatings …, 2019 - Elsevier
Abstract In this research, Ti-Cr-N coatings on tool steel were prepared using DC magnetron
sputtering at 25° C (RT), 130° C and 190° C. Coating corrosion behavior was observed in a …
sputtering at 25° C (RT), 130° C and 190° C. Coating corrosion behavior was observed in a …
Corrosion behaviour of decorative and wear resistant coatings on steel deposited by reactive magnetron sputtering–Tests and improvements
M Fenker, M Balzer, H Kappl - Thin Solid Films, 2006 - Elsevier
Depositions of decorative and wear resistant single layer coatings like TiN, Ti (B, N), CrN,
NbN, NbON,(Ti, Mg) N and multilayer coatings like Cr/CrN, Nb/NbN, CrN/NbN and NbN/Nb …
NbN, NbON,(Ti, Mg) N and multilayer coatings like Cr/CrN, Nb/NbN, CrN/NbN and NbN/Nb …