Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
[HTML][HTML] A review on heat treatment of cast iron: phase evolution and mechanical characterization
The isothermal heat treatment process has been identified as a unique process of
fabricating exceptional graphite cast iron due to its remarkable mechanical properties, such …
fabricating exceptional graphite cast iron due to its remarkable mechanical properties, such …
The coupling mechanism of shrinkage defects and graphite on the corrosion resistance of ductile iron
This study investigated the coupling mechanism of shrinkage defects and graphite on the
corrosion resistance of ductile iron by electrochemical measurements, quasi-in-situ …
corrosion resistance of ductile iron by electrochemical measurements, quasi-in-situ …
Microstructure and dry/wet tribological behaviors of 1% Cu-alloyed austempered ductile iron
CH Hsu, CY Lin, WS You - Materials, 2023 - mdpi.com
In this study, different austempering conditions were applied to 1 wt.% Cu-alloyed ductile
iron to produce various austempered ductile irons (ADIs). The study aimed to explore the …
iron to produce various austempered ductile irons (ADIs). The study aimed to explore the …
Mechanical properties and fracture toughness prediction of ductile cast iron under thermomechanical treatment
Temperature has a great influence on the mechanical properties of ductile cast iron or
nodular cast iron. A thermomechanical treatment was carried out at various elevated …
nodular cast iron. A thermomechanical treatment was carried out at various elevated …
[HTML][HTML] Thermal fatigue degradation progress in SiMo ductile cast iron under oxidation conditions
Thermal fatigue tests were conducted on a high Si low Mo ductile cast iron (DCI) under
oxidation conditions at 600° C. The study aimed to understand the evolution of surface …
oxidation conditions at 600° C. The study aimed to understand the evolution of surface …
Effect of TiC particles addition on tribological behavior of ductile iron
Y Zhao, W Zhang, Y Qu, S Dong, R Li, G Zhou, R Chen… - Tribology Letters, 2023 - Springer
In order to improve the wear resistance of ductile iron, different contents of TiC particles are
added into ductile iron used lost-foam casting and the tribological behavior of ductile iron is …
added into ductile iron used lost-foam casting and the tribological behavior of ductile iron is …
Structural and Phase Analysis of the Ausferritic Ductile Cast Iron Matrix Obtained by Heat Treatment and in the Raw State
This paper presents a comparative analysis of ausferritic ductile cast iron matrix obtained
through heat treatment and in its raw state. Ausferrite without heat treatment was achieved …
through heat treatment and in its raw state. Ausferrite without heat treatment was achieved …
Effect of Austempering Holding Time Variations of 30, 60, and 90 Minutes at 300 C on The Microstructure and Toughness of Nodular Cast Iron
The phases of the nodular cast iron matrix are similar to those of steel. Therefore, heat
treatment of steel can be applied to nodular cast iron. A potential heat treatment for nodular …
treatment of steel can be applied to nodular cast iron. A potential heat treatment for nodular …
Study on the Control Method of Ferrite Grain Size of Nodular Cast Iron and Its Effect on Low-Temperature Impact Toughness
SY Chen, QC Li, JJ Song, HQ Sun… - Journal of Materials …, 2024 - Springer
In this paper, the ferrite grain size was controlled by two annealing methods, which can
affect the low-temperature toughness of ferrite nodular cast iron. The annealing temperature …
affect the low-temperature toughness of ferrite nodular cast iron. The annealing temperature …
[HTML][HTML] Damage ratio strength criterion for cast iron
According to the assumption of small strains and total strain decomposition of cast iron, the
expressions of the inelastic principal strain rate and relative energy dissipation rate of cast …
expressions of the inelastic principal strain rate and relative energy dissipation rate of cast …