The integral thermal-hydraulic test facility is an important part of the design certification and
safety review of nuclear power plants. During the past few decades, a considerable number …

The scrubbing efficiency of aerosols contained in submerged gas jet in Pressure
Suppression Pool (PSP) is important during the severe accident of Nuclear Power Plant …

Gas submerged jet penetration length is a key parameter for many industrial applications.
Many experimental and theoretical works have been performed on pure steam and non …

In AP1000 plant, the Automatic Depressurization System (ADS) 1–3 stages operate to
discharge the high-temperature and high-pressure steam from the Reactor Coolant System …

The multi-hole steam ejection system is widely applied in practical engineering applications,
whereas the heat transfer mechanisms in unstable condensation conditions are not very …

The multi-hole spargers are widely used to discharge the high temperature and high
pressure steam for depressurization in most engineering applications due to its high …

Abstract For National Aeronautics and Space Administration's space mission planning, tons
of cryogenic propellants need to be stored under microgravity conditions. Because of heat …

In the initial event on a Loss of Coolant Accident (LOCA) of a typical Boiling Water Reactor
(BWR), mostly non-condensable gas is forced through blowdown pipes submerged …

Submerged gas jet plays a very important role in many industries occasion. It often causes
load of pool structure induced by flow oscillation. Exploring the mechanism and key …

To achieve the long-term challenge of nuclear energy public acceptance in Thailand,
nuclear safety research needed to be properly determined in both domestic and …