For elevated-temperature thermomechanical processing, the occurrence of recrystallization
during straining is known as dynamic recrystallization (DRX), which usually happens in Mg …

Friction stir welding and processing enabled the creation of stronger joints, novel ultrafine-
grained metals, new metal matrix composites, and multifunctional surfaces at user-defined …

This review article summarizes the hot deformation behavior of high entropy alloys (HEAs)
and the corresponding constitutive description of flow stress. The potential of hot working for …

Magnesium, the lightest structural metal, is approximately four times lighter than steel—the
most widely used metal in industrial applications. Currently available Mg alloys, however …

A new grain orientation spread approach (GOS≤ 5°) was proposed to study DRX of a Mg-
Zn-Zr alloy during hot deformation. DRXed grains possessed random texture while the …

The hot deformation behavior of an IN718 superalloy was studied by isothermal
compression tests under the deformation temperature range of 950–1100° C and strain rate …

The current research and development of magnesium alloys is summarized. Several
aspects of magnesium alloys are described: cast Mg alloy, wrought Mg alloy, and novel …

Abstract Environmentally degradable Zn–0.8 Mn alloy is highly ductile, which lays the
foundation for develo** high-performance Zn–Mn-based alloys. However, not only …

Dynamic recrystallization (DRX) often takes place during hot deformation of metallic
materials, which then exerts significant influence on the final microstructures and …

Grain refinement and strong basal texture were produced on AZ31B Mg alloy surface
concomitantly by a newly developed severe plastic deformation (SPD) process, severe …