Void nucleation during ductile rupture of metals: A review
Ductile rupture in metals is a phenomenon that affects a wide range of applications from
forming of automotive body panels to failure of pressure vessels. The incipient stage …
forming of automotive body panels to failure of pressure vessels. The incipient stage …
Overview of aluminum alloy mechanical properties during and after fires
PT Summers, Y Chen, CM Rippe, B Allen… - Fire Science …, 2015 - Springer
Aluminum alloys are increasingly being used in a broad spectrum of load-bearing
applications such as lightweight structures, light rail, bridge decks, marine crafts, and off …
applications such as lightweight structures, light rail, bridge decks, marine crafts, and off …
Creep-fatigue damage mechanisms and life prediction based on crystal plasticity combined with grain boundary cavity model in a nickel-based superalloy at 650° C
In this study, a dual-scale numerical procedure is developed to reveal the creep-fatigue
damage mechanisms and estimate the crack initiation life for notched structures made of …
damage mechanisms and estimate the crack initiation life for notched structures made of …
High-temperature fracture behavior of an α/β Titanium alloy manufactured using laser powder bed fusion
The room and high temperature (up to 600° C) mechanical properties, with emphasis on the
fracture toughness and fatigue resistance, of an α/β titanium alloy that was additively …
fracture toughness and fatigue resistance, of an α/β titanium alloy that was additively …
Void growth by dislocation emission
Laser shock experiments conducted at an energy density of 61 MJ/m2 revealed void
initiation and growth at stress application times of approximately 10 ns. It is shown that void …
initiation and growth at stress application times of approximately 10 ns. It is shown that void …
The influence of processing methods on creep of wrought and additively manufactured CrCoNi multi-principal element alloys
The influence of vacuum arc melting and mechanical processing (wrought) versus additive
manufacturing (AM) on the creep behavior of multi-principal element alloys (MPEA) is …
manufacturing (AM) on the creep behavior of multi-principal element alloys (MPEA) is …
[BOOK][B] Modeling of creep for structural analysis
K Naumenko, H Altenbach - 2007 - books.google.com
" Creep Modeling for Structural Analysis" develops methods to simulate and analyze the
time-dependent changes of stress and strain states in engineering structures up to the …
time-dependent changes of stress and strain states in engineering structures up to the …
Tensile creep mechanisms of Al-Mn-Sc alloy fabricated by additive manufacturing
Q Jia, Y Zhuo, Y Yan, C Lu, Z Chen, Y Cheng… - Additive …, 2024 - Elsevier
Abstract The incorporation of Sc/Zr elements into aluminum (Al) alloys provides great
opportunities for high temperature applications, due to the high coherency with the Al matrix …
opportunities for high temperature applications, due to the high coherency with the Al matrix …
Creep cavitation can establish a dynamic granular fluid pump in ductile shear zones
The feedback between fluid migration and rock deformation in mid-crustal shear zones is
acknowledged as being critical for earthquake nucleation, the initiation of subduction zones …
acknowledged as being critical for earthquake nucleation, the initiation of subduction zones …
Quartz grain size reduction in a granitoid rock and the transition from dislocation to diffusion creep
R Kilian, R Heilbronner, H Stünitz - Journal of Structural Geology, 2011 - Elsevier
In the Gran Paradiso metagranodiorite (Western Alps) small scale lower amphibolite facies
shear zones record the transition from a mylonite composed of polycrystalline mineral …
shear zones record the transition from a mylonite composed of polycrystalline mineral …