Inconel 718 is a hard-to-machine alloy with very poor machinability and low thermal
conductivity. Machining of such alloy is a critical manufacturing issue that should be carefully …

Real-time monitoring in CNC machine tools is focused on the early detection of tool wear,
and in this way to assess part piece quality. The machining process known as broaching is …

Cutting tool plays a critical role in modern manufacturing system and tool wear prediction
has a great effect on product cost and quality. Many efforts have been devoted to develo** …

The tribological behavior of quench-tempered ductile iron (QTDI) and austempered ductile
iron (ADI) with similar hardness was investigated. QTDI was composed of cementite …

Machining is one of the important fabrication process. Austempered Ductile Iron (ADI) has
10% less weight than Steel, good impact strength, up to 40% less cost than hardened steel …

In engineering applications, to increase productivity and to decrease production costs, the
selection of the proper engineering material is essential. At that point, machining operations …

The demand inherent to the aeronautical industry in terms of productivity and quality
requirements leads to develop new cutting tools. Hence, PCD tools meet the requirements in …

Boosting energy efficiency and machining quality are prominent solutions to achieve
sustainable production for turning operations. In this work, a machining condition-based …

The ductile irons of EN-GJS-400–15 grade were alloyed with various amounts of Al from 0 to
4 wt% by induction furnace melting. After fabrication, the Al-alloyed cast irons were …

In this paper, a grey iron was submitted to low temperature isothermal heat treatment,
austempering, in order to obtain austempered grey iron (AGI). Tensile strength, Brinell …