Surface modification of Norway spruce wood by octadecyltrichlorosilane (OTS) nanosol by dip** and water vapour diffusion properties of the OTS-modified wood
The present research deals with a simple dip** method to insert octadecyltrichlorosilane
(OTS) into cell walls of spruce wood and to deposit OTS layers on its inner and outer …
(OTS) into cell walls of spruce wood and to deposit OTS layers on its inner and outer …
Improvement of beech wood properties by in situ formation of polyesters of citric and tartaric acid in combination with glycerol
C L'hostis, MF Thévenon, E Fredon, P Gérardin - Holzforschung, 2018 - degruyter.com
Beech wood has been treated by impregnation followed by heating at various temperatures
with solutions containing citric acid (CA) or tartaric acid (TA) alone or in combination with …
with solutions containing citric acid (CA) or tartaric acid (TA) alone or in combination with …
Scrimber board (SB) manufacturing by a new method and characterization of SB's mechanical properties and dimensional stability
Y Zhang, X Huang, Y Zhang, Y Yu, W Yu - Holzforschung, 2018 - degruyter.com
A novel process has been developed for manufacturing poplar wood scrimber boards (SBs),
in the course of which thick veneers are produced first and then the oriented wood fiber mats …
in the course of which thick veneers are produced first and then the oriented wood fiber mats …
Effects of Thermal Treatment on Air-dried Density, Color Change, Average Surface Roughness, and Sound Absorption Capacity of Scots Pine.
This study was conducted to investigate some characteristics of thermally treated Scots pine
(Pinus sylvestris L.) wood specimens such as air-dried density, color change, average …
(Pinus sylvestris L.) wood specimens such as air-dried density, color change, average …
[PDF][PDF] Effect of Thermo-Vibro-Mechanic® densification process on the gloss and hardness values of some wood materials
This study aimed to determine the gloss and hardness values of lowdensity wood materials
densified using the Thermo-Vibro-Mechanic®(TVM) method after pretreatment with wood …
densified using the Thermo-Vibro-Mechanic®(TVM) method after pretreatment with wood …
Effect of aluminum sulfate impregnation heat joint treatment on color changes of Chinese fir
L Qu, J Qian, J Gao, Z Wang, Z He, S Yi - Wood Science and Technology, 2021 - Springer
Abstract Changes in the extract composition and lignin structure are the main factors that
affect color changes in wood during heat treatment. GC–MS analysis revealed that changes …
affect color changes in wood during heat treatment. GC–MS analysis revealed that changes …
Industrial Thermowood® and Termovuoto thermal modification of two hardwoods from Mozambique
The study aimed at treating metil (Sterculia appendiculata K. Schum) and neem
(Azadirachta indica A. Juss) timber from Mozambique under industrial conditions by steam …
(Azadirachta indica A. Juss) timber from Mozambique under industrial conditions by steam …
Influence of cooling rate on the physical properties, chemical composition, and mechanical properties of heat-treated rubberwood
C Chen, D Tu, X Zhao, Q Zhou, B Cherdchim, C Hu - Holzforschung, 2020 - degruyter.com
This study aimed to reduce the loss of mechanical strength in heat-treated rubberwood by
rapid cooling. Heat-treated rubberwood specimens were prepared by controlling their …
rapid cooling. Heat-treated rubberwood specimens were prepared by controlling their …
Use of spinning roller in cylindrical densification; spring back in black poplar, larch and cedar of Lebanon after densification
Wood materials have been the solution to many needs throughout history due to their
unique positive properties. By improving the properties of wood materials, their areas of use …
unique positive properties. By improving the properties of wood materials, their areas of use …