This article assesses the state-of-the-art for research on one-part alkali-activated materials,
with particular emphasis on recent work dealing with the constituent materials, preparation …

The development of low-carbon binders has been recognized as a means of reducing the
carbon footprint of the Portland cement industry, in response to growing global concerns …

Alkali-activated materials (AAM) are recognized as potential alternatives to ordinary Portland
cement (OPC) in order to limit CO 2 emissions as well as beneficiate several wastes into …

The bulk of the cement industry's environmental burden is from the calcareous source.
Calcium is mostly available naturally as limestone (CaCO 3), where almost half of the mass …

Alkali-activated materials (AAMs) are one of the alternative low-CO 2 binders. One-part
AAMs,(that is, mixing a solid precursor with a solid alkali activator and adding water) have …

Concrete is responsible for a significant share of global GHG emissions, which can be
mainly ascribed to the production of clinker. Alkali-activated concretes have been …

The aim of this study was the valorization of paper sludge waste from paper industry in
designing one-part geopolymer cement using ground granulated blast furnace slag as main …

The use of the alumina production waste bauxite residue (BR) in alkali-activated materials
(AAM), such as geopolymers, inorganic polymers and hybrid binders, is attracting …

In this work, two different laterites (iron contents of 13.07 and 49.34 wt%, respectively, for
lateritic clay, LAC, and iron-rich laterite, LAI) were selected and calcined at 600° C. The …

The key point of this investigation is to valorize CaCO 3-rich wood biomass ash (WBA) from
brick industry in the preparation of one-part white geopolymer cement (WGPC) using …