A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys
Today, superalloys (also known as hard-to-cut materials) such as nickel, titanium and cobalt
based cover a wide range of areas in engineering applications. At the same time …
based cover a wide range of areas in engineering applications. At the same time …
Reprint of: Electron probe microanalysis: A review of recent developments and applications in materials science and engineering
Electron probe microanalysis (EPMA) is a microanalytical technique widely used for the
characterization of materials. Since its development in the 1950s, different instrumental and …
characterization of materials. Since its development in the 1950s, different instrumental and …
[HTML][HTML] Tool wear patterns and their promoting mechanisms in hybrid cooling assisted machining of titanium Ti-3Al-2.5 V/grade 9 alloy
Hybrid lubri-cooling is a latest technology that provides synergistic cooling and lubrication
effect in the machining area especially in the cutting of titanium and its alloys. In this current …
effect in the machining area especially in the cutting of titanium and its alloys. In this current …
Performance analysis of coated carbide tool in turning of Nimonic 80A superalloy under different cutting environments
Nimonic 80A is a difficult-to-machine nickel-based superalloy thanks to its superior tensile
strength in high temperatures and oxidation resistance. However, cutting fluids applied to …
strength in high temperatures and oxidation resistance. However, cutting fluids applied to …
[HTML][HTML] Evaluation of tribological interactions and machinability of Ti6Al4V alloy during finish turning under different cooling conditions
K Leksycki, RW Maruda, E Feldshtein… - Tribology …, 2023 - Elsevier
Abstract The titanium alloy Ti6Al4V has several applications and is considered as a difficult-
to-machine material. This study evaluates some tribological interactions in finish turning of …
to-machine material. This study evaluates some tribological interactions in finish turning of …
[HTML][HTML] Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining
The primary tool material when machining Ti6Al4V titanium alloy is uncoated straight
cemented carbide. This study examines the performance of these materials during high …
cemented carbide. This study examines the performance of these materials during high …
Performance and wear mechanisms of PCD and pcBN cutting tools during machining titanium alloy Ti6Al4V
The need for increased productivity in difficult-to-machine titanium alloys has pushed
manufacturers to examine the potential of ultrahard cutting tool materials such as …
manufacturers to examine the potential of ultrahard cutting tool materials such as …
Tool wear mechanisms and micro-channels quality in micro-machining of Ti-6Al-4V alloy using the Ti (C7N3)-based cermet micro-mills
Y Wang, B Zou, C Huang - Tribology International, 2019 - Elsevier
The cutting mechanism changes back and forth between ploughing-dominated and
shearing-dominated in micro-milling of channel. This study was to research the tool wear …
shearing-dominated in micro-milling of channel. This study was to research the tool wear …
Investigating tool wear mechanisms in machining of Ti-6Al-4V in flood coolant, dry and MQL conditions
The objective of this study is to identify and explain tool wear mechanisms that dominate
during machining of titanium alloy Ti-6Al-4V in dry, flood coolant, and minimum quantity …
during machining of titanium alloy Ti-6Al-4V in dry, flood coolant, and minimum quantity …
[HTML][HTML] Machinability analysis of Ti-6Al-4V under cryogenic condition
Aerospace alloys are termed as hard to cut materials owing to their low thermal conductivity,
high temperature strength and elevated chemical reactivity. Cryogenic conditions can be …
high temperature strength and elevated chemical reactivity. Cryogenic conditions can be …