Challenging the IPv6 routing protocol for low-power and lossy networks (RPL): A survey
RPL is the IPv6 routing protocol for low-power and lossy networks, standardized by IETF in
2012 as RFC6550. Specifically, RPL is designed to be a simple and inter-operable …
2012 as RFC6550. Specifically, RPL is designed to be a simple and inter-operable …
RPL routing protocol over IoT: A comprehensive survey, recent advances, insights, bibliometric analysis, recommendations, and future directions
In the course of time, the Internet of Things (IoT) has attracted significant research interest.
However, IoT devices have limited resources available in terms of battery power, processing …
However, IoT devices have limited resources available in terms of battery power, processing …
Bluetooth low energy mesh networks: A survey
Bluetooth Low Energy (BLE) has gained significant momentum. However, the original
design of BLE focused on star topology networking, which limits network coverage range …
design of BLE focused on star topology networking, which limits network coverage range …
Building the Internet of Things with bluetooth smart
Abstract The Internet of Things, or the IoT, is an emerging, disruptive technology that
enables physical devices to communicate across disparate networks. IP has been the de …
enables physical devices to communicate across disparate networks. IP has been the de …
[HTML][HTML] A survey on Bluetooth multi-hop networks
N Todtenberg, R Kraemer - Ad Hoc Networks, 2019 - Elsevier
Bluetooth was firstly announced in 1998. Originally designed as cable replacement
connecting devices in a point-to-point fashion its high penetration arouses interest in its ad …
connecting devices in a point-to-point fashion its high penetration arouses interest in its ad …
System architecture directions for post-soc/32-bit networked sensors
The emergence of low-power 32-bit Systems-on-Chip (SoCs), which integrate a 32-bit MCU,
radio, and flash, presents an opportunity to re-examine design points and trade-offs at all …
radio, and flash, presents an opportunity to re-examine design points and trade-offs at all …
BLEach: Exploiting the full potential of IPv6 over BLE in constrained embedded IoT devices
The ability to fine-tune communication performance is key to meeting the requirements of
Internet of Things applications. While years of low-power wireless research now allows …
Internet of Things applications. While years of low-power wireless research now allows …
[PDF][PDF] Improving the Reliability of Bluetooth Low Energy Connections.
To sustain a reliable data exchange, applications based on Bluetooth Low Energy (BLE)
need to effectively blacklist channels and adapt the physical mode of an active connection at …
need to effectively blacklist channels and adapt the physical mode of an active connection at …
Evaluating bluetooth low energy for IoT
Bluetooth Low Energy (BLE) is the short-range, single-hop protocol of choice for the edge of
the IoT. Despite its growing significance for phone-to-peripheral communication, BLE's …
the IoT. Despite its growing significance for phone-to-peripheral communication, BLE's …
TinyNet: A lightweight, modular, and unified network architecture for the internet of things
Interoperability among a vast number of heterogeneous IoT nodes is a key issue. However,
the communication among IoT nodes does not fully interoperate to date. The underlying …
the communication among IoT nodes does not fully interoperate to date. The underlying …