During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

The onset of dynamic recrystallization is treated in terms of a model based on the principles
of irreversible thermodynamics. In the analysis, the initiation of dynamic recrystallization is …

In constant strain rate tests, the occurrence of dynamic recrystallization (DRX) is traditionally
identified from the presence of stress peaks in flow curves. However, not all materials …

Hot compression tests of Mg-Gd-Y-Zr alloy at different deformation temperatures and strains
were carried out with Gleeble-1500 simulator at strain rate of 0.002 s− 1. The microstructure …

The effect of large-strain cold-to-warm deformation on the microstructures and mechanical
properties of various steels and alloys is critically reviewed. The review is mainly focused on …

The behavior of C, HSLA, tool and stainless steels in the austenitic condition during
industrial hot forming is reviewed. In the constitutive relations, it is primarily the activation …

The microstructural evolution of a 304 H austenitic stainless steel subjected to hot
compression was studied by the electron backscattered diffraction (EBSD) technique …

The dynamic recrystallization (DRX) behavior of Nb and Nb–Ti microalloyed steels has been
investigated. It has been observed that the initial austenite grain size, the amount of …

Both the critical stress and strain for initiation of dynamic recrystallization (DRX) were
determined using:(1) the strain hardening rate versus stress curve,(2) the natural logarithm …

The critical stress for initiation of dynamic recrystallization (DRX) can be identified from the
inflection point on the strain hardening rate (qds/de) versus flow stress (s) curve. This kind of …