The contribution of the entire manufacturing chain to the final residual stress state cannot be
neglected. In-between processes, the stress redistribution has to satisfy the equilibrium …

The use of continuous cooling bainitic steels can provide a more energy efficient
manufacturing route. However, for their use in mechanical components like gears, it is …

In this study, the sliding wear of a DIN 18MnCrSiMo6-4 continuous cooling bainitic steel
plasma nitrided with a nitrogen rich gas composition was investigated. To evaluate the …

This article presents the results of finite element analyses of the influence of reaction forces
on stresses and strains at the contact points of the rollers of prism supports with cylindrical …

The current study investigated the wear performances of GGG60 nodular cast iron under
different loads after induction hardening at different powers and durations. The background …

This paper aims at analyzing the effects of the roller pre-straightening of wire-rods on
residual stress distributions in SAE 1045 steel bars. The combined drawing process is used …

Infeed rotary swaging is an established incremental cold forming production technique for
axisymmetric workpieces. Among others, work hardening as well as near net shape forming …

The intended form of relatively flexible cylindrical parts (shafts and axles) may be restored by
straightening by flexure under a distributed load, with subsequent strengthening of the …

Shafts are usually manufactured from bars that are cold drawn, cut machined, induction
hardened, straightened, and finally ground. The main distortion is characterized by bending …

This study optimized the wear resistance of GGG60 nodular cast iron, commonly used in
high-wear parts like crankshafts and gears, through induction hardening with varying …