The question of the formation mechanism of annealing twins in face-centered cubic metals
and alloys, which is still not resolved in spite of the fact that the existence of these defects is …

A critical evaluation of recrystallization vs. strain induced boundary migration (SIBM) as the
mechanism responsible behind the grain boundary engineering (GBE) in alloy 617 is made …

A multiscale investigation of the microstructures and mechanical properties of Inconel 718
fabricated by selective laser melting (SLM) was performed on the as-SLM and heat-treated …

Grain boundary engineering (GBE) provides an effective approach for tailoring the
properties of metallic materials by optimizing the grain boundary character distribution …

Grain boundary engineering (GBE) approaches involving small deformation and annealing
to modify grain boundary networks have been widely used to improve grain boundary …

Grain boundary engineering of Fe-based austenitic stainless steels and other materials has
been successful in producing a large increase in twin and twin related grain boundaries …

Inconel 718 fabricated by selective laser melting (SLM) was used to investigate the evolution
of grain boundary (GB) network structures from as-SLM to heat-treated (HT) samples. Using …

The issue of hydrogen embrittlement (HE) in face-centered (FCC) structured alloys is
significant for H storage and transportation application due to unanticipated damage beyond …

The creep-fatigue interaction has been recognized as the main failure mode of most
structural components operating in the high-temperature regime. The cyclic life (N f) usually …

The development of nickel-based superalloys with high Co addition has aroused
widespread interest recently owing to their potential application in hot sections of gas …