Laser texturing and MAO (micro-arc oxidation) hybrid process was adopted to enhance the
tensile-shear strength of laser welded CFRTP/TC4 joint. Introduction of porous MAO coating …

In laser welded–brazed Al/steel dissimilar joints, interfacial metallic compound (IMC) had a
determined effect on the joint strength. Dynamics interfacial fractured behaviors and …

A porous high entropy alloy (HEA) coating was prepared on a steel surface by vacuum
sintering. The coating was then used as a transition layer during dissimilar laser joining of Al …

Friction stir welding (FSW) is in existence for well over three decades. Started primarily with
the joining of aluminium alloys, FSW is gradually engaged for other alloys and also …

Surface microtexture is a promising technique for enhancing the quality of heterogeneous
joints. This study developed a novel surface texturing method to improve the reliability of …

In-situ SEM can intuitively observe the changes in microstructure and microcrack initiation
during the deformation process of the specimen. In this paper, the microstructural evolution …

WMoTaNb refractory high entropy alloy (RHEA) coating was prepared successfully by laser
cladding. The coating is a composite structure composed of BCC1 and BCC2 structural HEA …

The oxide film could realize the formation of the chemical bonding between metal and
plastic. In this study, surface pre-oxidation of AZ31B magnesium alloy was performed by two …

Large-scale components of steel and aluminum alloys (Fe-Al) with high bonding strength
are highly needed from space exploration to the fabrication of transportation systems. The …

Light metal/carbon fiber reinforced polymer (CFRP) hybrid structures have been considered
a key component for lightweight and advanced multi-material structures in modern …