AGR 3/4 Irradiation Test Final As Run Report

BP Collin - 2015 - osti.gov
Several fuel and material irradiation experiments have been planned for the Idaho National
Laboratory Advanced Reactor Technologies Technology Development Office Advanced Gas …

Multiscale, mechanistic modeling of irradiation-enhanced silver diffusion in TRISO particles

PCA Simon, JH Ke, C Jiang, LK Aagesen… - Journal of Nuclear …, 2025 - Elsevier
Tristructural isotropic (TRISO) particles are under consideration for use in several proposed
advanced nuclear reactor concepts. The silicon carbide (SiC) layer in TRISO acts as a …

The AGR-3/4 fission product transport irradiation experiment

BP Collin, PA Demkowicz, DA Petti, GL Hawkes… - … Engineering and Design, 2018 - Elsevier
Abstract AGR-3/4 was the combined third and fourth planned irradiations for the US
Department of Energy (DOE) Advanced Gas Reactor (AGR) Fuel Development and …

Impact of temperature variations on BISON predictions of Ag release in AGR-1 and AGR-2 experiments

CB Parsons, PCA Simon, BD Wirth - Journal of Nuclear Materials, 2024 - Elsevier
Understanding and quantifying the release of fission products like silver (Ag) from
TRistructural ISOtropic (TRISO) fuel particles is important to assess the safe operation of …

Technical program plan for inl advanced reactor technologies advanced gas reactor fuel development and qualification program

TR Mitchell - 2020 - osti.gov
High-temperature gas cooled reactors (HTGRs) are graphite moderated nuclear reactors
cooled with helium. Their high outlet temperatures and thermal energy conversion efficiency …

AGR TRISO Fuel Fission Product Release Data Summary

JD Stempien, L Cai, PA Demkowicz - 2023 - osti.gov
Knowledge of fission product retention in and release from TRISO fuel under normal and off-
normal conditions is needed for reactor safety analyses. This is important for coated-particle …

Device-sensor assembly FEA modeling to support kalman-filter-based junction temperature monitoring

A Soldati, N Delmonte, P Cova… - IEEE Journal of …, 2019 - ieeexplore.ieee.org
Junction temperature monitoring for power devices is an essential requirement for high-
reliability applications. Temperature sensitive electrical parameters (TSEPs) are powerful …

Improving thermal model prediction through statistical analysis of irradiation and post-irradiation data from AGR experiments

BT Pham, GL Hawkes, JJ Einerson - Nuclear Engineering and Design, 2014 - Elsevier
As part of the High Temperature Reactors (HTR) R&D program, a series of irradiation tests,
designated as Advanced Gas-cooled Reactor (AGR), have been defined to support …

Uncertainty Quantification of Calculated Temperatures for the AGR 5/6/7 Experiment

CB T Pham, GL Hawkes - 2022 - osti.gov
This report documents the quantification of uncertainty of the calculated temperature data for
the Advanced Gas Reactor (AGR) 5/6/7 fuel irradiation experiment conducted in the …

AGR-1 Irradiation Test Final As-Run Report, Rev 2

BP Collin - 2012 - osti.gov
This document presents the as-run analysis of the AGR-1 irradiation experiment. AGR-1 is
the first of eight planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development …