This paper presents a comprehensive overview on the current status of solid oxide fuel cell
(SOFC) energy systems technology with a deep insight into the techno-energy performance …

Abstract Tubular Solid Oxide Fuel Cells (TSOFCs) owns plenty of merits not only these of
common SOFCs but also some merits including rapid start-up, less sealing requirements …

In accomplishment of massive energy demand, the solid oxide fuel cells (SOFCs) have
proven as apotheosis candidates due to their high energy conversion efficiencies, low …

Nickel–yttria stabilized zirconia (Ni–YSZ) cermet is the most commonly used anode in solid
oxide fuel cells (SOFCs). The current article provides an insight into parameters which affect …

Microstructures of porous electrodes have great importance for promoting electrochemical
reactions in solid oxide fuel cells (SOFCs). The present paper describes the application of …

We report the preparation of thick ceramic electrodes of the olivine LiFePO 4 (LFP) with high
mass loading. These electrodes are preparated by means of Powder Extrusion Moulding …

The stability and performance of YSZ (yttria stabilized zirconia) based solid oxide cells with
Ruddlesden–Popper phases as the oxygen electrode have significantly improved …

A number of bolt-microtubular anode supports (BMASs) are manufactured by winding the
corresponding thin tapes on threaded rods of different thread pitches and depths, followed …

Cathode activation polarisation is one of the main contributions to the losses of a Solid
Oxide Fuel Cell. To reduce this loss we use a pulsed laser to modify the surface of yttria …

The effects of anode support tape length on the manufacturability and level of surface
patterning in bolt-microtubular anode supports (BMASs) for solid oxide fuel cells (SOFCs) …