Common ash (Fraxinus excelsior L.) wood was heat treated in an oven at temperatures of
160, 180, and 200 ºC, and under atmospheric pressure in the presence of air for a duration …

In this study, silver birch (Betula pendula) and Scots pine (Pinus sylvestris) wood planks
(1000× 100× 25 mm) were thermally modified in pilot-scale equipment. Research extended …

Delamination resistance and tensile shear strength (TSS) are essential for load-bearing
timber structures. Thus these two factors were investigated on industrially bonded ash wood …

In this work, pine and birch wood were modified by graphene oxide using a single vacuum
impregnation method. The research results indicate that the impregnation of wood with …

The influence of bacterial cellulose gel film pretreatment methods on the efficiency of
enzymatic hydrolysis was investigated. An increase in the efficiency of enzymatic hydrolysis …

This study was conducted to identify the pathways by which bamboo sawdust (BSD)
degrades into sugar (predominantly glucose) and the resultant glucose degrades into an …

This study assessed the potential for recycling the Ni-Co-Mn (NCM) cathode from spent
Lithium-Ion Batteries (LIBs) using Tangerine Peel (TP) as a reducing agent in CH3COOH …

The potential of fast-growing poplar species was evaluated for bioethanol production. The
yields of glucose and xylose from acid and enzymatic hydrolysis were compared. The …

This paper compares the acid and enzymatic hydrolysis in relation to bioethanol production.
The pulp obtained from wood of the fast-growing poplar species (Populus deltoides x …

Pinewood (Pinus sylvestris L.) was thermally modified at temperatures of 160ºC and 200ºC
for 2, 6 and 10 hour periods, respectively. The severe conditions of the heat treatment …