Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction
The deformation responses at 77 and 293 K of a FeCoNiCr high-entropy alloy, produced by
a powder metallurgy route, are investigated using in situ neutron diffraction and correlative …
a powder metallurgy route, are investigated using in situ neutron diffraction and correlative …
Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction
A FeCoCrNiMo 0.23 high entropy alloy was processed by powder metallurgy with two
conditions: hot extruded and annealed. In situ neutron diffraction, together with electron …
conditions: hot extruded and annealed. In situ neutron diffraction, together with electron …
Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy
XX Zhang, A Lutz, H Andrä, M Lahres, WM Gan… - International journal of …, 2021 - Elsevier
Abstract The AlSi10Mg alloy produced by laser powder bed fusion (LPBF) possesses a
novel microstructure and higher mechanical properties compared with its casting …
novel microstructure and higher mechanical properties compared with its casting …
An additively manufactured and direct-aged AlSi3. 5Mg2. 5 alloy with superior strength and ductility: Micromechanical mechanisms
XX Zhang, A Lutz, H Andrä, M Lahres, D Sittig… - International Journal of …, 2021 - Elsevier
Abstract An AlSi3. 5Mg2. 5 (wt%) alloy with excellent mechanical properties was produced
via laser powder bed fusion in this study. The yield strength, tensile strength, and elongation …
via laser powder bed fusion in this study. The yield strength, tensile strength, and elongation …
An effective stacking fault energy viewpoint on the formation of extended defects and their contribution to strain hardening in a Fe–Mn–Si–Al twinning-induced …
A deformation-dependent stacking fault energy (SFE) viewpoint is invoked to interpret the
low strain rate tensile deformation of a Fe–27Mn–2.5 Si–3.5 Al austenitic steel at room …
low strain rate tensile deformation of a Fe–27Mn–2.5 Si–3.5 Al austenitic steel at room …
Enhanced strength-ductility synergy in a novel V-containing γ ″-strengthened CoCrNi-based multi-component alloy
Y Pan, A Dong, Y Zhou, D Du, D Wang, G Zhu… - Materials Science and …, 2021 - Elsevier
Abstract γ ″precipitates have been introduced into V-containing CoCrNi-based alloy,
showing superior strength-ductility synergy (product of ultimate-tensile-strength and …
showing superior strength-ductility synergy (product of ultimate-tensile-strength and …
[HTML][HTML] Mechanical performance and formability of laser-welded dissimilar butt joints between medium-Mn stainless steel and high-strength carbon steel
The mechanical performance and stretch formability of dissimilar butt joints between
medium-Mn stainless steel (MMn-SS) and high-strength carbon steel (HS-CS) processed by …
medium-Mn stainless steel (MMn-SS) and high-strength carbon steel (HS-CS) processed by …
Enhancement of mechanical properties of a TRIP-aided austenitic stainless steel by controlled reversion annealing
Controlled martensitic reversion annealing was applied to a heavily cold-worked metastable
austenitic low-Ni Cr–Mn austenitic stainless steel (Type 201) to obtain different ultrafine …
austenitic low-Ni Cr–Mn austenitic stainless steel (Type 201) to obtain different ultrafine …
Effect of Ce on oxidation behaviour and microstructure evolution of a nickel-saving austenitic heat-resistant cast steel
T Liu, K Zheng, J Wang, Y Lin, Z Zheng, J Long - Corrosion Science, 2020 - Elsevier
The effect of Ce on the oxidation behaviour and microstructure evolution of nickel-saving
austenitic heat-resistant cast steel in air at 900° C was investigated by performing the …
austenitic heat-resistant cast steel in air at 900° C was investigated by performing the …
Twinning and martensitic transformations in nickel-enriched 304 austenitic steel during tensile and indentation deformations
Twinning and martensitic transformation have been investigated in nickel-enriched AISI 304
stainless steel subjected to tensile and indentation deformation. Using electron backscatter …
stainless steel subjected to tensile and indentation deformation. Using electron backscatter …