The properties of nanoemulsions and various methods for their preparation including the
high-energy and low-energy emulsification methods and the combined methods are …

Thin conducting films are distinct from bulk materials and have become prevalent over the
past decades as they possess unique physical, electrical, optical, and mechanical …

Pure indium oxide (In 2 O 3) nanoparticles was synthesized by an inexpensive and solid
state reaction method using indium nitrate in muffle furnace at 400° C for 4 h. The …

Tin-doped Indium oxide thin films in different compositions (Sn= 0, 5, 10, 15, 20 at. wt%)
were prepared on glass substrates at the substrate temperature of 250° C in an oxygen …

The rapid growth of new electronics and energy technologies requires the use of rare
elements of the periodic table. For many of these elements, little is known about their …

Colloidal, monodisperse, highly crystalline ITO nanoparticles with various particle sizes and
tin contents were prepared by a one-pot thermal decomposition of tin and indium precursors …

In this work, various techniques such as differential scanning calorimetry-thermogravimetric
analysis (DSC-TGA), Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible-near …

ITO thin films were prepared by electron beam evaporation of ceramic ITO target. The films
were subsequently annealed in air atmosphere at the temperatures 300° C and 600° C in …

ITO and FTO nano-powders were synthesized employing a new route sol–gel combustion
hybrid method using acetylene black as a fuel. The dried gels exhibited an auto-catalytic …

Well-crystallized and nano-sized indium tin oxide (ITO) powders were prepared by a
solvothermal process from a mixed solution consisting of indium nitrate and tin chloride. The …