[BOOK][B] Shape interrogation for computer aided design and manufacturing
NM Patrikalakis, T Maekawa - 2002 - Springer
Shape interrogation is the process of extraction of information from a geometric model. It is a
fundamental component of Computer Aided Design and Manufacturing (CAD/CAM) …
fundamental component of Computer Aided Design and Manufacturing (CAD/CAM) …
5-axis flank milling: A state-of-the-art review
Flank milling is of importance to machining aircraft structural parts, turbines, blades and
several other mechanical parts. It decreases manufacturing time, enhances quality and …
several other mechanical parts. It decreases manufacturing time, enhances quality and …
Mobility measurement and degradation mechanisms of MOSFETs made with ultrathin high-k dielectrics
Accurate measurements and degradation mechanisms of the channel mobility for MOSFETs
with HfO/sub 2/as the gate dielectric have been systematically studied in this paper. The …
with HfO/sub 2/as the gate dielectric have been systematically studied in this paper. The …
Implicit swept volume sdf: Enabling continuous collision-free trajectory generation for arbitrary shapes
In the field of trajectory generation for objects, ensuring continuous collision-free motion
remains a huge challenge, especially for non-convex geometries and complex …
remains a huge challenge, especially for non-convex geometries and complex …
Swept volumes: fundation, perspectives, and applications
A survey of swept volume concepts and methods is presented. It consolidates and relates
seemingly different terminology and methods. The methods are divided into five major …
seemingly different terminology and methods. The methods are divided into five major …
Tool path deformation in 5-axis flank milling using envelope surface
This paper deals with assessment and correction of tool path in 5-axis machining. The tool
trajectory is described using two curves; each one corresponding to the trajectory of two …
trajectory is described using two curves; each one corresponding to the trajectory of two …
A unified approach to the accuracy analysis of planar parallel manipulators both with input uncertainties and joint clearance
G Chen, H Wang, Z Lin - Mechanism and machine theory, 2013 - Elsevier
This paper presents a unified approach to predict the accuracy performance of the general
planar parallel manipulators (PPMs) both due to the input uncertainties and the joint …
planar parallel manipulators (PPMs) both due to the input uncertainties and the joint …
Surface swept by a toroidal cutter during 5-axis machining
This paper presents a method of determining the shape of the surface swept by a tool that
follows a 5-axis tool path for machining curved surfaces. The method consists of discretising …
follows a 5-axis tool path for machining curved surfaces. The method consists of discretising …
From computer-aided to intelligent machining: Recent advances in computer numerical control machining research
Y Li, CH Lee, J Gao - Proceedings of the Institution of …, 2015 - journals.sagepub.com
The aim of this article is to provide an introduction and overview of recent advances in the
key technologies and the supporting computerized systems and to indicate the trend of …
key technologies and the supporting computerized systems and to indicate the trend of …
Swept surface determination for five-axis numerical control machining
CJ Chiou, YS Lee - International Journal of Machine Tools and …, 2002 - Elsevier
This paper presents a closed-form solution of the swept profile of a generalized cutter in five-
axis numerical control (NC) machining. The machine configurations and tool movements …
axis numerical control (NC) machining. The machine configurations and tool movements …