An approach to the evaluation of linear elastic solutions in anisotropic multimaterial corners
under generalized plane-strain or plane-stress conditions is developed. This approach …

T-stress effects on crack deflection in notched brittle materials are investigated by means of
an average stress approach. It is shown that the crack advance always reveals to be straight …

An approach to the evaluation of linear elastic solutions in anisotropic multimaterial corners
under generalized plane-strain or plane-stress conditions is developed. This approach …

Unidirectional tensile tests of PMMA square hole specimens result in mixed mode crack
initiation at the square hole corners, highlighted by inclined cracks with respect to the V …

In the present work a general procedure for the experimental evaluation of Generalized-
Fracture-Toughness values at multimaterial closed corners is defined. The lack of …

An interface crack between single crystal silicon (SC-Si) and silicone rubber was examined.
Mixed mode fracture tests were performed on Arcan-type specimens at different mode …

The regularities of the effect of a complex stress state on the strength of an AlMg5/epoxy
adhesive joint are experimentally studied at− 50 and+ 23° C in tension+ shear and …

The singular behavior for multi-material V-notch notched plates is studied in this paper,
considering both isotropic and anisotropic materials. Firstly, by introducing the asymptotic …

In this paper, the singular behavior for anisotropic multimaterial V‐notched plates is
investigated under antiplane shear loading condition. Firstly, the elastic governing equations …

The paper reports the results of Brazilian tests on aluminum alloy specimens with an epoxy
interlayer. ED-20 epoxy resin cured by polyamidepolyamine and diethylenetriamine is used …