Unlike stress-induced martensitic transformation, deformation twinning as well as dislocation
gliding, deformation kinking is an uncommon deformation mechanism in metastable β …

Metastable β-titanium (Ti) alloys have been extensively used in aerospace industry owing to
the outstanding mechanical properties. Temperature arising sometimes becomes …

Stress relaxation taking place after hot deformation is modelled by incorporating the
simultaneous action of various physical phenomena. Dislocation recovery, recrystallization …

Static recrystallization (SRX) behaviors and corresponding recrystallization mechanisms of
7Mo super-austenitic stainless steel were studied under different deformation conditions …

The hot deformation behavior of spray-formed 7055 aluminum alloy was investigated using
a thermo-mechanical simulator by a series of isothermal and constant strain-rate …

Double-pass hot compression tests were carried out over a wide range of holding time (0–
180 s) and Zener-Hollomon parameter (1.6 E15–1.3 E20) to study the deformation behavior …

The influence of solution annealing temperature on the microstructure, mechanical
properties and corrosion resistance of a lean duplex stainless steel Fe-0.02 C-20Cr-6Mn …

ABSTRACT IN718 sheets were separately solution treated to two different temperatures ie
970° C (HT970) and 1070° C (HT1070). Due to higher solution treatment temperature …

Thermo-mechanical treatment that involves cold deformation and subsequent annealing is
given to the material to alter the grain boundary development. In the present work, an …

Thermo-mechanical softening forms the basis for hot working of metallic materials. In
materials with hierarchical microstructures such as martensite, softening processes can be …