Sensorless control of IPMSM for last 10 years and next 5 years

SK Sul, YC Kwon, Y Lee - CES Transactions on Electrical …, 2017 - ieeexplore.ieee.org
This paper presents the developments of sensorless control of interior permanent magnet
synchronous machine (IPMSM) for last 10 years, which could be divided into the past and …

Rotor position estimation

F Briz, MW Degner - IEEE Industrial Electronics Magazine, 2011 - ieeexplore.ieee.org
High-frequency excitation sensorless control methods measure the response of the machine
to some form of high-frequency excitation from which the rotor position is estimated. The …

Experimental identification of the magnetic model of synchronous machines

E Armando, RI Bojoi, P Guglielmi… - IEEE Transactions …, 2013 - ieeexplore.ieee.org
This paper proposes and formalizes a comprehensive experimental approach for the
identification of the magnetic model of synchronous electrical machines of all kinds. The …

Novel sensorless control strategy with injection of high-frequency pulsating carrier signal into stationary reference frame

JM Liu, ZQ Zhu - IEEE Transactions on Industry Applications, 2013 - ieeexplore.ieee.org
In this paper, a novel sensorless control strategy with the injection of a high-frequency
pulsating carrier signal into a stationary reference frame is proposed. Differing from the two …

Permanent-magnet temperature estimation in PMSMs using pulsating high-frequency current injection

DD Reigosa, D Fernandez, H Yoshida… - IEEE Transactions …, 2015 - ieeexplore.ieee.org
The injection of a high-frequency signal in the stator via inverter has been shown to be a
viable option to estimate the magnet temperature in permanent-magnet synchronous …

PMSM sensorless control by injecting HF pulsating carrier signal into ABC frame

Q Tang, A Shen, X Luo, J Xu - IEEE Transactions on Power …, 2016 - ieeexplore.ieee.org
Spatial-saliency-tracking-based high-frequency (HF) pulsating carrier injection method is
widely employed in permanent-magnet synchronous machines sensorless control. In order …

Sensorless control scheme of IPMSMs using HF orthogonal square-wave voltage injection into a stationary reference frame

G Wang, D **ao, G Zhang, C Li… - IEEE Transactions on …, 2018 - ieeexplore.ieee.org
This paper proposes a new sensorless control scheme of interior permanent magnet
synchronous motors (IPMSMs) using high-frequency (HF) orthogonal square-wave voltage …

Magnet temperature estimation in surface PM machines using high-frequency signal injection

DD Reigosa, F Briz, P García… - IEEE Transactions …, 2010 - ieeexplore.ieee.org
This paper proposes a method to estimate the magnet temperature in surface permanent-
magnet machines using high-frequency carrier signal injection. The injection of a high …

Sensorless control of PMSM for the whole speed range using two-degree-of-freedom current control and HF test current injection for low-speed range

M Seilmeier, B Piepenbreier - IEEE Transactions on Power …, 2014 - ieeexplore.ieee.org
In this paper, an innovative sensorless two-degree-of-freedom current control scheme for the
whole speed range is proposed. It consists of a model-based dynamic feedforward control to …

Novel carrier signal injection method using zero-sequence voltage for sensorless control of PMSM drives

PL Xu, ZQ Zhu - IEEE Transactions on Industrial Electronics, 2015 - ieeexplore.ieee.org
In this paper, a novel pulsating carrier signal injection strategy utilizing zero-sequence
voltage is proposed for sensorless control of permanent-magnet synchronous machine …