Printed parts displaying good green/handling strength are vital for the Binder Jet 3D Printing
(BJ3DP) process to succeed in manufacturing complex parts with thin sections and tiny …

Ultrafine WC cemented carbides with 10 wt% mechanically alloyed Al x CoCrCuFeNi (x is
the aluminium content in molar ratio and ranges from 0 to 1.5) high-entropy alloy (HEA) …

Coarse grained WC-Co cemented carbides with Co content varying from 3 wt% to 12 wt%
were fabricated from composite powder. The composite powder was prepared through …

Ultrafine WC–Co cemented carbides with Co gradient were prepared by one-step (1300°
C/5 min) and two-step (1300° C/3 min→ 1200° C/5 min) spark plasma sintering. Effects of …

WC–Co cemented carbide/steel brazed at low–temperature is of significant scientific and
technical interest. In this study, the interface microstructure between the filler alloy and WC …

This work explores the possibilities for the ultrafast sintering of binderless tungsten carbide
by electric/pressure assisted sintering. A limited voltage (3–4 V) in AC condition was applied …

WC-10 wt% Co cemented carbides were prepared by a new oscillatory pressure sintering
(OPS) process in the present work, and the influence of sintering temperature on their …

The application of Ti (C, N)-based cermets remains limited due to their low toughness. The
fracture toughness of cermets can be significantly improved by using advanced sintering …

Laser melting deposition (LMD) technology is characterized by a fast-forming speed,
additive manufacturing, and a multi-axis operating system, which is suitable for preparing …

Cemented carbide is a difficult material to be processed by Additive Manufacturing (AM)
necessitating the need for process chain development to overcome the limitations of AM …