Spherical cementite in the bainitic matrix (SCBM) microstructures in the high carbon powder
metal steels having 1.5 wt% C were achieved in specimens with the spherical cementite in …

The present study fine tunes the processing route of a eutectoid steel to shape an optimum
strength–toughness combination through appropriate microstructural design. A fully lamellar …

The effects of cooling rate on isothermal spheroidizing annealing (SA) of hot-rolled GCr15
bearing steel have been investigated. The results show that controlling the cooling rate …

In this paper, the effects of carbon, Si, Cr and Mn partitioning on ferrite hardening were
studied in detail using a medium Si low alloy grade of 35CHGSA steel under ferrite …

Microstructure and toughness properties of high carbon powder metal steels, to which
spheroidizing heat treatments were applied by using three different methods, were …

Investigation of carbon and silicon partitioning on ferrite hardening in a medium silicon low
alloy ferrite-martensite dual-phas Page 1 25 Investigation of carbon and silicon partitioning …

In this paper, the effects of carbon, Si, Cr and Mn partitioning on ferrite hardening were
studied in detail using a medium Si low alloy grade of 35CHGSA steel under ferrite …

In this paper, the micromechanical behavior of ferrite microphase was evaluated in
conjunction with carbon, and silicon partitioning occurred during prior austenite to ferrite …