Brazing is a crucial joining technology in industries where nickel-superalloy components
must be joined. Nickel-based brazing filler metals are extensively employed, possessing …

The potential of high-entropy alloys (HEAs) to meet or exceed austenitic stainless steel
performance with the additional benefit of improved hot corrosion/oxidation resistance …

Plate-type heat exchangers are anticipated to be used in the next-generation nuclear
industry, and solid-state diffusion welding is a critical technology for building plate-type heat …

A polycrystalline Ni 3 Al-based superalloy was joined through transient liquid phase (TLP)
bonding technique. A post bond heat treatment (PBHT) was successively conducted. Creep …

Transient liquid phase (TLP) diffusion bonding of MGH956 to GH3230 superalloy was
conducted using BNi5 amorphous foil as the interlayer. The effect of bonding temperature …

In this study, creep behavior of dissimilar transient liquid phase (TLP) joint between high-Cr
ferritic steel and TP347H austenitic steel was investigated at 600° C under stresses of 140 …

Concentrated solar power (CSP) with thermal storage is a renewable approach for meeting
baseload and peak load electric power. An additivelymanufactured (AM) supercritical …

Very high temperature reactors (VHTRs) are planned to be operated between 550 and 950∘
C and demand a thermally efficient intermediate heat exchanger (IHX) in the heat transport …

In this paper, the effects of temperature and bonding time on creep behavior of nickel-based
superalloy GTD-111 joints produced by transient liquid phase (TLP) process were studied …

Transient liquid phase (TLP) bonding technology was effectively used to join a Ni-based
superalloy using a BNi-2 amorphous interlayer. The TLP joint consisted of isothermal …